Board Anchor BT／BTP - Post-Installed Anchor Sanko Techno Product Information

Board Anchor　BT／BTP

For hollow walls / Screw-in type

Easy installation just by tightening with a screwdriver.
Accurate positioning is possible due to its sharp tip structure.
Excellent workability without the need for pilot holes.
Also ideal for the gypsum lining method.

［Application］

Installation for Curtain Rod / Interior Decoration / Intercom / Electrical Work

Installation Procedure

❶Screw in

❷Tighten

❸Attach fixing fixtures and fasten the screw

❹Installation complete

Mechanical Properties

BT/BTP Type

強度表をPDFで開く

Item no.	Max. load	Test base material
	Unit：kN
Item no.	Tensile strength	Test base material
BT-4×25	0.1	Gypsum board 9.5/12.5mm
BTP-3.5×25	0.1	Gypsum board 9.5/12.5mm

Size Chart

BT TYPE: ZINC ALLOY DIE CASTING

サイズ表をPDFで開く

Open chart in PDF

			Unit：mm	Unit：pc		Unit：pack
Item no.	Screw diameter	L	dk	Qty・per
Item no.	Screw diameter	L	dk	Blister pack	Medium box	Carton
BT-4×25-P20	4.0	25	15	20	6	60
BT-4×25-P30	4.0	25	15	30	5	20
BT-4×25-P100	4.0	25	15	100	－	15

・BT-4 × 25-P20 is a display set product. Orders are accepted in units of 6 packs.
・For installation on a calcium silicate board, the board thickness is up to 8 mm.
・Use 15 mm + fixture thickness as a guide for the screw length to be used.

BTP TYPE: PLASTIC

サイズ表をPDFで開く

Open chart in PDF

			Unit：mm	Unit：pc		Unit：pack
Item no.	Screw diameter	L	dk	Qty・per
Item no.	Screw diameter	L	dk	Blister pack	Medium box	Carton
BTP-3.5x25B-P20	3.5〜4.0	25	12	20	6	60
BTP-3.5×25-P30	3.5〜4.0	25	12	30	5	20
BTP-3.5×25-P100	3.5〜4.0	25	12	100	–	15

・BTP-3.5x25B-P20 (with screws) is a display set product. Orders are accepted in units of 6 packs.
・Use 15 mm + fixture thickness as a guide for the screw length to be used.

Product Details