Fastener Products

Product Details

Cross Tight Fastener Bolt　XT

  • One-side Fastener Bolt that allows user to visually check the installation status.
  • Can be installed from one side.
  • Can be installed with a commercially available impact driver.
  • Uses a crescent spring washer that prevents excessive tightening and allows user to visually confirm that the product has been tightened without forgetting it.
  • Can also be used for joining curved materials.
  • Can achieve orthogonal installation.
［Application］

❶ Inserting
❷ Pre-tightening
❸ Tightening
■Recommended conditions when using an impact driver
Voltage 18V
Max. torque※ 180N・m
RPM 0〜3,600min-1
BPM 0〜4,000min-1
Hex. bolt width across flat 6.35mm
※This is the max. torque value of a typical impact driver
●Drill the pilot hole with the specified diameter.
●Be careful not to hit the expansion part.
●Do not overtighten.
●Once tightened, the sleeve cannot be removed.

強度表をPDFで開く
Unit：kN
Item no. Max. load
Tensile strength Shear strength
XT-1209 24.3 24.2
XT-1214

・This is the load when Cross Tight Fastener Bolt breaks
・Since it varies depending on the plate thickness, please check the test report separately

XT TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：N・ｍ Unit：pc
Sleeve diameter Item no.  Head height Under-neck
length		 Sleeve
length		 Width across flat Drill diameter Recommended
board thickness		 Estimated fixing
thickness		 Required distance
on the inner side		 Max. expansion
range		 Tightening
torque		 Qty・per
Hex. bolt Sleeve Carton
12 XT-1209 14 49 46 13 19 13.5 1.6～6.0 3.5～9.5 45 42 15 100
12 XT-1214 14 54 51 13 19 13.5 1.6～12.0 8.5～14.5 45 42 15 100
・Pilot hole diameter: 13.0 to 14.5mm
XT TYPE: STAINLESS STEEL
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：N・ｍ Unit：pc
Sleeve diameter Item no.  Head height Under-neck
length		 Sleeve
length		 Width across flat Drill diameter Recommended
board thickness		 Estimated fixing
thickness		 Required distance
on the inner side		 Max. expansion
range		 Tightening
torque		 Qty・per
Hex. bolt Sleeve Carton
12 XT-1209S 14.5 49 46 13 19 13.5 1.6~6.0 3.5~9.5 45 42 25 100
12 XT-1214S 14.5 54 51 13 19 13.5 1.6~12.0 8.5~14.5 45 42 25 100
・Pilot hole diameter: 13.0 to 14.5mm

For Fastener Bolt UT-S, UTB-S, XT Type
Roof High Bit
Click here for detail ☞
Cross Tight Fastener Bolt Socket
Box bit and spanner integrated tool
Item no.
XT-S12
Cross Tight Fastener Bolt Socket Bit
Item no.
XT-SB12
・The Cross Tight Fastener Bolt Socket Bit XT-SB12 is replaceable.
・Can easily understand the tightening condition of anchor by the rotation speed of the white installation speed confirmation line.