Fastener Products

Product Details

Drill Screw　PAN／PAN-S／TH

Pan Head
  • Typical head shape with Phillips-Recess.
  • There is little wobbling during installation, and the penetration and installation work can be completed in one go.
  • Made of steel products are coated with trivalent chromate which is eco-friendly and corrosion resistant.
  • Corrosion protection coating is used for made of stainless steel products.
［Application］
Installation for Siding / Aluminum Sash / Drainer / Handrail / Wire and Pipe Fixing / Duct Joint Fastening (TH type), etc.

・Press the drill point vertically on the place to be installed, then use a power tool to press and slowly rotate the screw.

●Please select the suitable product after confirming the thickness of the fixture.
●Please follow the size shown in the catalog to choose a recommended screwdriver bit.
●Please install at the rotation speed according to the size.
●Install the screw vertically to the fixture..
●Stop the rotation immediately after tightening is completed. Excessive torque can cause problems such as instability in the product fit and head skipping.

Working length explanatory diagram

In order to securely fasten the Drill Screw, the thread must completely protrude 3 pitches from the base steel plate. Therefore, the max. working length should be calculated by the length below the neck (L) -the length of the drill point (Ln) -3 pitches, and then select the suitable drill screw based on the working length.

※Caution: When installing the Drill Screw, it may not be possible to secure the specified working length depending on the condition of the jobsite. Please use it after checking the actual situation of the site.

・Blister pack
PAN-P/PAN-SP type
PAN-P（color）type

PAN TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
d Item no. L (b) Recommended
board thickness		 Lg1 Lg2 Ln Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
3.5 PAN-3.5×10 10 6 1.0〜2.3 − 2.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
3.5 PAN-3.5×13 13 9 1.0〜2.3 − 5.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
3.5 PAN-3.5×16 16 12 1.0〜2.3 − 8.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
3.5 PAN-3.5×19 19 15 1.0〜2.3 − 11.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
3.5 PAN-3.5×25 25 21 1.0〜2.3 − 17.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
4 PAN-4×10 10 5 1.0〜1.2 − 1.2 4.5 8.2 2.9 2 TB-2 1,000 10,000
4 PAN-4×13 13 7 1.2〜3.2 − 3.2 5.5 8.2 2.9 2 TB-2 1,000 10,000
4 PAN-4×16 16 10 1.2〜3.2 − 6.0 5.5 8.2 2.9 2 TB-2 1,000 10,000
4 PAN-4×19 19 13 1.2〜3.2 − 9.0 5.5 8.2 2.9 2 TB-2 1,000 10,000
4 PAN-4×25 25 19 1.2〜3.2 − 15.0 5.5 8.2 2.9 2 TB-2 700 7,000
4 PAN-4×30 30 24 1.2〜3.2 − 20.0 5.5 8.2 2.9 2 TB-2 500 5,000
4 PAN-4×35 35 29 1.2〜3.2 − 25.0 5.5 8.2 2.9 2 TB-2 400 4,000
4 PAN-4×40 40 34 1.2〜3.2 − 30.0 5.5 8.2 2.9 2 TB-2 400 4,000
4 PAN-4×45 45 39 1.2〜3.2 − 35.0 5.5 8.2 2.9 2 TB-2 250 2,500
4 PAN-4×50 50 44 1.2〜3.2 − 40.0 5.5 8.2 2.9 2 TB-2 250 2,500
5 PAN-5×13 13 8 1.2〜3.2 − 3.2 5.0 9.5 3.4 2 TB-2 1,000 10,000
5 PAN-5×16 16 9 1.6〜4.5 − 4.5 6.5 9.5 3.4 2 TB-2 800 8,000
5 PAN-5×19 19 12 1.6〜4.5 − 7.5 6.5 9.5 3.4 2 TB-2 700 7,000
5 PAN-5×25 ◆ 25 18 1.6〜4.5 − 13.5 6.5 9.5 3.4 2 TB-2 500 5,000
5 PAN-5×30 ◆ 30 23 1.6〜4.5 − 18.5 6.5 9.5 3.4 2 TB-2 400 4,000
5 PAN-5×35 ◆ 35 28 1.6〜4.5 − 23.5 6.5 9.5 3.4 2 TB-2 300 3,000
5 PAN-5×40 ◆ 40 33 1.6〜4.5 − 28.5 6.5 9.5 3.4 2 TB-2 250 2,500
5 PAN-5×45 ◆ 45 38 1.6〜4.5 − 33.5 6.5 9.5 3.4 2 TB-2 250 2,500
5 PAN-5×50 ◆ 50 43 1.6〜4.5 − 38.5 6.5 9.5 3.4 2 TB-2 250 2,500
6 PAN-6×19 ◆ 19 11 2.3〜4.5 − 6.0 7.5 10.5 4.1 3 KTB-3 500 5,000
6 PAN-6×25 ◆ 25 16 2.3〜6.0 − 11.0 8.5 10.5 4.1 3 KTB-3 400 4,000
6 PAN-6×35 ◆ 35 26 2.3〜6.0 − 21.0 8.5 10.5 4.1 3 KTB-3 250 2,500
◆V Fluted Thread
PAN-S TYPE: STAINLESS STEEL　SUS410　CORROSION PROTECTION COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
d Item no. L (b) Recommended
board thickness		 Lg1 Lg2 Ln Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
3.5 PAN-3.5x10S 10 6 1.0〜2.3 − 2.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
3.5 PAN-3.5x13S 13 9 1.0〜2.3 − 5.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
3.5 PAN-3.5x16S 16 12 1.0〜2.3 − 8.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
3.5 PAN-3.5x19S 19 15 1.0〜2.3 − 11.5 3.5 7.0 2.5 2 TB-2 1,000 10,000
4 PAN-4x13S 13 7 1.2〜3.2 − 3.2 5.5 8.2 2.9 2 TB-2 1,000 10,000
4 PAN-4x16S 16 10 1.2〜3.2 − 6.0 5.5 8.2 2.9 2 TB-2 1,000 10,000
4 PAN-4x19S 19 13 1.2〜3.2 − 9.0 5.5 8.2 2.9 2 TB-2 1,000 10,000
4 PAN-4x25S ◆ 25 19 1.2〜3.2 − 15.0 5.5 8.2 2.9 2 TB-2 700 7,000
4 PAN-4x30S ◆ 30 24 1.2〜3.2 − 20.0 5.5 8.2 2.9 2 TB-2 500 5,000
4 PAN-4x35S ◆ 35 29 1.2〜3.2 − 25.0 5.5 8.2 2.9 2 TB-2 400 4,000
4 PAN-4x40S ◆ 40 34 1.2〜3.2 − 30.0 5.5 8.2 2.9 2 TB-2 400 4,000
4 PAN-4x45S ◆ 45 39 1.2〜3.2 − 35.0 5.5 8.2 2.9 2 TB-2 250 2,500
4 PAN-4x50S ◆ 50 44 1.2〜3.2 − 40.0 5.5 8.2 2.9 2 TB-2 250 2,500
5 PAN-5x13S 13 8 1.2〜3.2 − 3.2 5.0 9.5 3.4 2 TB-2 1,000 10,000
5 PAN-5x16S 16 9 1.6〜4.5 − 4.5 6.5 9.5 3.4 2 TB-2 800 8,000
5 PAN-5x19S 19 12 1.6〜4.5 − 7.5 6.5 9.5 3.4 2 TB-2 700 7,000
5 PAN-5x25S ◆ 25 18 1.6〜4.5 − 13.5 6.5 9.5 3.4 2 TB-2 500 5,000
5 PAN-5x30S ◆ 30 23 1.6〜4.5 − 18.5 6.5 9.5 3.4 2 TB-2 400 4,000
5 PAN-5x35S ◆ 35 28 1.6〜4.5 − 23.5 6.5 9.5 3.4 2 TB-2 300 3,000
5 PAN-5x40S ◆ 40 33 1.6〜4.5 − 28.5 6.5 9.5 3.4 2 TB-2 250 2,500
5 PAN-5x45S ◆ 45 38 1.6〜4.5 − 33.5 6.5 9.5 3.4 2 TB-2 250 2,500
◆V Fluted Thread
TH TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
d Item no. L (b) Recommended
board thickness		 Lg1 Lg2 Ln Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
4 TH-4×13 13 9 0.8〜1.6 − 5.0 4.0 9.4 2.5 2 TB-2 1,000 10,000
・TH type has a truss head, and it is for ducts and thin plates.