CT Anchor (Drop-in Anchor) CT／SCT Type

CT Anchor (Drop-in Anchor)　CT／SCT Type

For concrete / Internal cone driving type

Main dimensions are based on JCAA and SHASE-S standard products.
As an internal cone driving type, it is easy for everyone to check whether the anchor has been properly hammered.
Clean results as it can be installed uniformly to the concrete surface.
The completion of installation can be easily checked by using the designated setting tool.

［Application］

Installation for Pipe Hanger / Light Gauge Steel Framing / Duct / Cable Rack Hanging Scaffold, etc.

Installation Procedure

❶Drill a hole

❷Clean the dust

❸Hammer the anchor

⚫Be sure to use the setting tool we specified for a safe and reliable construction.
⚫Make sure to drive until the shoulder of the setting tool touches the top of the anchor.

❹Use spanners to tighten up

・Suggested installation torque

Thread		Installation torque N・m
M6	–	4	–
M8	W5/16	9	8
M10	W3/8	18	14
M12	W1/2	31	34
M16	W5/8	80	70

Mechanical Properties

CT/SCT Type

強度表をPDFで開く

Thread	D	Embed. depth	Max. load
		Unit：mm	Unit：kN
Thread	D	Embed. depth	Tensile strength
M6	8.0	25	6.7
M8・W5/16	10.0	30 ◆ 40( Thickness of finishing material 10mm)	10.7
W3/8	12.0	40	14.7
M10・W3/8	12.5	40 ◆ 70( Thickness of finishing material 30mm)	15.6
W1/2	16.0	40	16.5
M12・W1/2	16.0	50 ◆ 80( Thickness of finishing material 30mm)	24.5
M16・W5/8	20.0	60	35.7

・Fc=21N/mm² concrete

In the table ◆It is a long type considering the case where there is a finishing material (30 mm, 40 mm) on the concrete surface [Figure 1] The embed. depth of anchor in concrete is the same regardless of finishing material, so the load remains the same [Figure 2]

Size Chart

CT TYPE (METRIC THREAD): STEEL / TRIVALENT CHROMATE COATING

…JCAA Certified　

…SHASE-S Certified

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
M6	CT-625	8.0	25	10	8.5	25	25	100	1,000
M8	CT-830	10.0	30	12	10.5	30	30	100	1,000
M10	CT-1040	12.5	40	16	13.0	40	40	50	1,000
M10	CT-1070	12.5	70	25	13.0	70	70	50	500
M12	CT-1250	16.0	50	20	16.5	50	50	50	500
M12	CT-1280	16.0	80	25	16.5	80	80	30	300
M16	CT-1660	20.0	60	23	20.5	60	60	25	250

CT TYPE (INCH THREAD): STEEL / TRIVALENT CHROMATE COATING

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
W5/16	CT-2530	10.0	30	12	10.5	30	30	100	1,000
W3/8	CT-3040	12.0	40	16	12.5	40	40	50	1,000
W3/8	CT-3070	12.5	70	25	13.0	70	70	50	500
W1/2	CT-4040	16.0	40	15	16.5	40	40	50	500
W1/2	CT-4050	16.0	50	20	16.5	50	50	50	500
W1/2	CT-4080	16.0	80	25	16.5	80	80	30	300
W5/8	CT-5060	20.0	60	23	20.5	60	60	25	250

SCT TYPE (METRIC THREAD): STAINLESS STEEL SUS304

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
M6	SCT-625	8.0	25	10	8.5	25	25	100	1,000
M8	SCT-830	10.0	30	12	10.5	30	30	100	1,000
M8	SCT-840	10.0	40	18	10.5	40	40	100	800
M10	SCT-1040	12.5	40	16	13.0	40	40	50	1,000
M12	SCT-1250	16.0	50	20	16.5	50	50	50	500
M16	SCT-1660	20.0	60	23	20.5	60	60	25	250

SCT TYPE (INCH THREAD): STAINLESS STEEL SUS304

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
W5/16	SCT-2530	10.0	30	12	10.5	30	30	100	1,000
W3/8	SCT-3040	12.0	40	16	12.5	40	40	50	1,000
W1/2	SCT-4050	16.0	50	20	16.5	50	50	50	500
W5/8	SCT-5060	20.0	60	23	20.5	60	60	25	250

Product Details