CT Anchor (Drop-in Anchor) GT／SGT／GT-D Type

CT Anchor (Drop-in Anchor)　GT／SGT／GT-D Type

For concrete / Internal cone driving type

Installation is possible even with through holes.
As internal cone driving type, it is easy for everyone to check whether the anchor has been properly hammered.
Clean results as it can be installed uniformly to the concrete surface.
The completion of installation can be checked easily by using a designated setting tool.
It is easy to understand the position of the anchor due to its red lip (GT-3030R).

［Application］

Installation for Pipe Hanger / Light Gauge Steel Framing / Duct, etc.

Installation Procedure

❶Drill a hole

❷Clean the dust

❸Hammer the anchor

❹Fasten the appropriate size threaded rod or threaded bolt into the anchor

Mechanical Properties

GT/SGT/GT-D Type

強度表をPDFで開く

Thread	D	Embed. depth	Max. load
		Unit：mm	Unit：kN
Thread	D	Embed. depth	Tensile strength
M8・W5/16	10.0	30	10.7
W3/8	12.0	30	12.7
W3/8	12.0	40	14.7

・Fc=21N/mm² concrete

Set

GT-3030MK Complete Set

Set Contents	Packaging
	Unit：pcs
GT-3030	500
Anchor Drill	2
Setting Tool	1

・Anchor Drill ADX-12.5SDS
・Setting Tool GT-3030HSDS-K

GT-3030 Bucket Set

Set Contents	Packaging
	Unit：pcs
GT-3030	500

GT-3030R Bucket Set

Set Contents	Packaging
	Unit：pcs
GT-3030R	500

Size Chart

GT TYPE : STEEL / TRIVALENT CHROMATE COATING

…JCAA Certified

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
M8	GT-830	10.0	30	12	10.5	30	30	100	800
W5/16	GT-2530	10.0	30	12	10.5	30	30	100	800
W3/8	GT-3030	12.0	30	12	12.5	30	30	100	800
W3/8	GT-3040	12.0	40	15	12.5	40	40	100	600

SGT TYPE : STAINLESS STEEL SUSXM7

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
W3/8	SGT-3030	12.0	30	12	12.5	30	30	100	800

GT-D TYPE : STEEL / HOT-DIP GALVANIZING

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
W3/8	GT-3030D	12.0	30	12	12.5	30	30	100	800

Product Details