Double Cone Anchor NSL／NSB Type

For concrete / Double cone type

Installation can be managed by torque value.
Maintains strength even in locations subject to repeated loads.
Small variation in strength (standard deviation) due to parallel expansion fixation.
Holes for installation equipment can be designed with the outer diameter of the main body (NSL).
Construction can be done from the top of the fixture, and there is no deviation in the fixture position (NSB).
Optimal for places where shear strength is required as well as tensile strength (NSB).

［Application］

Installation for Medical Equipment / Transmission Equipment Rack / Oblique Slope Slip Material for Ship Landing / Plant Facility, etc.

❶Drill a hole

●The drilling depth depends on the thickness of the fixture.

❷Clean the dust

NSL

❸Use spanners to tighten up

❹Installation complete

NSB

❸Use spanners to tighten up

●Install with the standard installation torque, and install NSL type attachments with less than the suggested tightening torque.

・Suggested installation torque

❹Installation complete

強度表をPDFで開く

Thread	D	Embed. depth	Effective min. embed. depth	Max. load
			Unit：mm		Unit：kN
Thread	D	Embed. depth	Effective min. embed. depth	Tensile strength	Shear strength
M10	14.5	80	68	33.2	32.4
M12	17.6	90	74	45.3	47.1
M16	23.6	110	98	77.4	101.0
M20	27.6	135	120	121.9	136.1

・Fc=21N/mm² concrete

強度表をPDFで開く

Thread	D	Embed. depth	Min. edge distance	Max. load
			Unit：mm		Unit：kN
Thread	D	Embed. depth	Min. edge distance	Tensile strength	Shear strength
M10	14.5	68	150	33.2	42.2
M10	14.5	68	300	33.2	65.2
M12	17.6	74	160	45.3	56.8
M12	17.6	74	320	45.3	72.3
M16	23.6	98	210	77.4	107.9
M16	23.6	98	420	77.4	154.1

・Fc=21N/mm² concrete

NSL TYPE: STEEL / TRIVALENT CHROMATE COATING

サイズ表をPDFで開く

Open chart in PDF

NSB TYPE: STEEL / TRIVALENT CHROMATE COATING

サイズ表をPDFで開く

Open chart in PDF

Product Details