Fastener Products

All Saw　AQ-D／AQ

For thin iron plate, aluminum plate, stainless steel plate, plastic, PVC, FRP

AQ-D／AQ
※Do not use with impact drivers, vibration drills, or hammer drills.

Open chart in PDF

Diameter AQ-D Diameter
Unit：mm
Full length Max. recommended
board thickness
16 79 4.0 16
17 79 4.0 17
18 79 4.0 18
19 79 4.0 19
20 79 4.0 20
21 79 4.0 21
22 79 4.0 22
23 79 4.0 23
24 79 4.0 24
26 79 4.0 26
27 79 4.0 27
28 79 4.0 28
29 79 4.0 29
30 79 4.0 30
31 79 4.0 31
32 79  4.0 32
33 79 4.0 33
34 79 4.0 34

※High center drill Bit is in the set.
※Discontinued when stock runs out.
※Do not use with impact drivers, vibration drills, or hammer drills.

Open chart in PDF

Diameter AQ Diameter
Unit：mm
Full length Max. recommended
board thickness
36 82 4.0 36
37 82 4.0 37
39 82 4.0 39
40 82 4.0 40
41 82 4.0 41
42 82 4.0 42
43 82 4.0 43
44 82 4.0 44
45 82 4.0 45
46 82 4.0 46
47 82 4.0 47
48 82 4.0 48
49 82 4.0 49
50 82 4.0 50
51※ 82 4.0 51※
52※ 82 4.0 52※
53※ 82 4.0 53※
54※ 82 4.0 54※
55 82 4.0 55
56※ 82 4.0 56※
57※ 82 4.0 57※
58※ 82 4.0 58※
59※ 82 4.0 59※
60 82 4.0 60
61※ 82 4.0 61※
62※ 82 4.0 62※
63※ 82 4.0 63※
64※ 82 4.0 64※
65 82 4.0 65
66※ 82 4.0 66※
67※ 82 4.0 67※
68※ 82 4.0 68※
69※ 82 4.0 69※
70 82 4.0 70
71※ 82 4.0 71※
72※ 82 4.0 72※
73※ 82 4.0 73※
74※ 82 4.0 74※
75 82 4.0 75
76※ 82 4.0 76※
77※ 82 4.0 77※
78※ 82 4.0 78※
79※ 82 4.0 79※
80 82 4.0 80

・Shank shape: Straight shaft / three chamfers
・High center drill bit is in the set
※Made-to-order

CDH

Open chart in PDF

CDH
For iron plates/ aluminum plates/ resin plates/ stainless steel plates
Recommended diameter Item no.
15〜35 AQ-CDH5
36〜65 AQ-CDH6
66〜80 AQ-CDH8
・Not sold separately due to out of stock.

Recommended RPM
Unit: RPM
Diameter Recommended RPM
15〜24 1,200〜1,440
25〜39 720〜865
40〜64 450〜540
65〜79 276〜330
80 225〜270
※When drilling hard-to-cut materials such as stainless steel plates, please set the RPM to about 50% of the recommended value