Grip Anchor GA／SGA／GA-D／316SGA Type

Grip Anchor　GA／SGA／GA-D／316SGA Type

For concrete / Hammer the body type

Expanded applications by selecting bolts according to specifications.
After removing the equipment, the anchor does not interfere with anything else.

［Application］

Installation for Pipe Hanger / Light Gauge Steel Framing / Duct / Cable Rack Hanging / Scaffold

Installation Procedure

❶Drill a hole

❷Clean the dust

❸Hammer the anchor

❹Use spanners to tighten up

・Suggested installation torque

Thread		Installation torque N・m
M6	W1/4	4	4
M8	W5/16	9	8
M10	W3/8	18	14
M12	W1/2	31	34
M16	W5/8	80	70
M20	W3/4	150	120
M22	W7/8	200	200
M24	W1	260	300

Mechanical Properties

GA/SGA/GA-D/316SGA Type

強度表をPDFで開く

Thread	D	Embed. depth	Max. load
		Unit：mm	Unit：kN
Thread	D	Embed. depth	Tensile strength
M6・W1/4	10.5	30	9.3
M8・W5/16	12.0	35	12.7
M10・W3/8	14.0	40 ◆ 70( Finishing material thickness 30mm)	14.9
M12・W1/2	17.3	50 ◆ 80( Finishing material thickness 30mm)	25.5
M16・W5/8	21.5	60 ◆ 100( Finishing material thickness 40mm)	33.3
M20・W3/4	25.4	80	52.9
M22・W7/8	28.5	90	60.8
M24・W1	32.0	110	76.5

・Fc=21N/mm² concrete

GA/SGA (Short) Type

強度表をPDFで開く

Thread	D	Embed. depth	Max. load
		Unit：mm	Unit：kN
Thread	D	Embed. depth	Tensile strength
M10・W3/8	14.0	30	10.8
M12・W1/2	17.3	40	17.6

・Fc=21N/mm² concrete

GA-3030/GA-3035/SGA-3035 Type

強度表をPDFで開く

Thread	D	Embed. depth	Max. load
		Unit：mm	Unit：kN
Thread	D	Embed. depth	Tensile strength
W3/8	12.0	30	9.8
W3/8	12.0	35	11.7

・Fc=21N/mm² concrete

◆It is a long type considering the case where there is a finishing material (30 mm, 40 mm) on the concrete surface [Figure 1]. The embed. depth of anchor in concrete is the same regardless of finishing material, so the load remains the same [Figure 2].

Size Chart

GA TYPE (METRIC THREAD): STEEL / TRIVALENT CHROMATE COATING

…JCAA Certified

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
M6	GA-6M	10.5	30	10	11.0	30	33	100	800
M8	GA-8M	12.0	35	13	12.5	35	39	100	800
M10	GA-10MS	14.0	30	13	14.5	30	35	100	600
M10	GA-10M	14.0	40	15	14.5	40	45	100	600
M10	GA-10ML	14.0	70	25	14.5	70	75	50	300
M12	GA-12MS	17.3	40	17	18.0	40	46	50	300
M12	GA-12M	17.3	50	20	18.0	50	56	50	300
M12	GA-12ML	17.3	80	25	18.0	80	86	30	180
M16	GA-16M	21.5	60	25	22.0	60	68	25	150
M16	GA-16ML	21.5	100	30	22.0	100	108	15	90
M20	GA-20M	25.4	80	30	26.0	80	90	15	90
M22	GA-22M	28.5	90	35	29.0	90	105	6	36
M24	GA-24M	32.0	110	45	33.0	110	127	6	36

GA TYPE (INCH THREAD): STEEL / TRIVALENT CHROMATE COATING

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
W1/4	GA-20	10.5	30	10	11.0	30	33	100	800
W5/16	GA-25	12.0	35	13	12.5	35	39	100	800
W3/8	GA-30S	14.0	30	13	14.5	30	35	100	600
W3/8	GA-30	14.0	40	15	14.5	40	45	100	600
W3/8	GA-30L	14.0	70	25	14.5	70	75	50	300
W1/2	GA-40S	17.3	40	17	18.0	40	46	50	300
W1/2	GA-40	17.3	50	20	18.0	50	56	50	300
W1/2	GA-40L	17.3	80	25	18.0	80	86	30	180
W5/8	GA-50	21.5	60	25	22.0	60	68	25	150
W5/8	GA-50L	21.5	100	30	22.0	100	108	15	90
W3/4	GA-60	25.4	80	30	26.0	80	90	15	90
W7/8	GA-70	28.5	90	35	29.0	90	105	6	36
W1	GA-80	32.0	110	45	33.0	110	127	6	36
W3/8	GA-3030	12.0	30	9	12.5	30	35	100	800
W3/8	GA-3035	12.0	35	11	12.5	35	40	100	800

316SGA TYPE (METRIC THREAD): STAINLESS STEEL SUS316

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
M6	316SGA-6M	10.5	30	10	11.0	30	33	100	800
M8	316SGA-8M	12.0	35	13	12.5	35	39	100	800
M10	316SGA-10M	14.0	40	15	14.5	40	45	100	600
M12	316SGA-12M	17.3	50	20	18.0	50	56	50	300
M16	316SGA-16M	21.5	60	25	22.0	60	68	25	150

SGA TYPE (METRIC THREAD): STAINLESS STEEL SUSXM7・SUS304

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
M6	SGA-6M	10.5	30	10	11.0	30	33	100	800
M8	SGA-8M	12.0	35	13	12.5	35	39	100	800
M10	SGA-10MS	14.0	30	13	14.5	30	35	100	600
M10	SGA-10M	14.0	40	15	14.5	40	45	100	600
M10	SGA-10ML	14.0	70	25	14.5	70	75	50	300
M12	SGA-12M	17.3	50	20	18.0	50	56	50	300
M12	SGA-12ML	17.3	80	25	18.0	80	86	30	180
M16	SGA-16M	21.5	60	25	22.0	60	68	25	150
M16	SGA-16ML	21.5	100	30	22.0	100	108	15	90
M20	SGA-20M	25.4	80	30	26.0	80	90	15	90
M22	SGA-22M	28.5	90	35	29.0	90	105	6	36
M24	SGA-24M	32.0	110	45	33.0	110	127	6	36

SGA TYPE (INCH THREAD): STAINLESS STEEL SUSXM7・SUS304

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
W1/4	SGA-20	10.5	30	10	11.0	30	33	100	800
W5/16	SGA-25	12.0	35	13	12.5	35	39	100	800
W3/8	SGA-30S	14.0	30	13	14.5	30	35	100	600
W3/8	SGA-30	14.0	40	15	14.5	40	45	100	600
W1/2	SGA-40	17.3	50	20	18.0	50	56	50	300
W5/8	SGA-50	21.5	60	25	22.0	60	68	25	150
W3/4	SGA-60	25.4	80	30	26.0	80	90	15	90
W3/8	SGA-3035	12.0	35	11	12.5	35	40	100	800

GA-D TYPE (METRIC THREAD): STEEL / HOT-DIP GALVANIZING

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
M10	GA-10MD	14.0	40	15	14.5	40	45	100	600
M10	GA-10MLD ※	14.0	70	25	14.5	70	75	50	300
M12	GA-12MD	17.3	50	20	18.0	50	56	50	300
M12	GA-12MLD ※	17.3	80	25	18.0	80	86	30	180
M16	GA-16MD	21.5	60	25	22.0	60	68	25	150
M16	GA-16MLD ※	21.5	100	30	22.0	100	108	15	90
M20	GA-20MD	25.4	80	30	26.0	80	90	15	90
M22	GA-22MD	28.5	90	35	29.0	90	105	6	36
M24	GA-24MD	32.0	110	45	33.0	110	127	6	36

※It is a made-to-order product

GA-D TYPE (INCH THREAD): STEEL / HOT-DIP GALVANIZING

サイズ表をPDFで開く

Open chart in PDF

							Unit：mm		Unit：pc
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Qty・per
Thread	Item no.	D	L	ℓ	Drilling diameter	Embed. depth	Drilling depth	Box	Carton
W3/8	GA-30D	14.0	40	15	14.5	40	45	100	600
W1/2	GA-40D	17.3	50	20	18.0	50	56	50	300
W5/8	GA-50D	21.5	60	25	22.0	60	68	25	150
W3/4	GA-60D	25.4	80	30	26.0	80	90	15	90

Product Details