Fastener Products

Product Details

Deformed Bar Anchor　DGA Type

For concrete / Hammer the body type
  • Easy installation without the need for a specialized setting tool, just hammer in the main body.
［Application］
Joint Bar for Partition / Block Wall / Earthen Floor Slab

❶Drill a hole
❷Clean the dust
❸Hammer the anchor
❹Installation complete

Deformed Bar Anchor

強度表をPDFで開く
Unit：mm Unit：kN
Deformed bar D Embed. depth Max. load
Tensile strength Shear strength
D10 14.0 40 15.2 20.1
12.0 40 13.4 15.4
D13 17.3 50 23.2 36.7
14.0 50 17.9 29.6
D16 21.5 60 31.0 50.1
・Fc=21N/mm2 concrete

DGA TYPE      ANCHOR BODY: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Deformed bar Item no. Deformed bar
Full length		 Deformed bar
material		 D L Drilling
diameter		 Embed. depth Drilling depth Qty・per
Box
Ｄ10 DGA-1045 400 SD295 14.0 40 14.5 40 45 50
Ｄ10 DGA-1045-12 ※ 400 SD295 12.0 40 12.5 40 44 50
★Ｄ13 DGA-1325 ※ 200 SD295 17.3 50 18.0 50 56 80
★Ｄ13 DGA-1335 ※ 300 SD295 17.3 50 18.0 50 56 70
★Ｄ13 DGA-1360 550 SD295 17.3 50 18.0 50 56 30
★Ｄ13 DGA-1360-14 ※ 560 SD295 14.0 40 14.5 50 55 30
Ｄ16 DGA-1626 200 SD345 21.5 60 22.0 60 68 50
Ｄ16 DGA-1631 250 SD345 21.5 60 22.0 60 68 50
Ｄ16 DGA-1636 ※ 300 SD345 21.5 60 22.0 60 68 40
Ｄ16 DGA-1675 690 SD345 21.5 60 22.0 60 68 20
★We can use SD345 material to manufacture D13 deformed bar upon request
※It is a made-to-order product

【Drilling】
Anchor Drill Bit [ADXⅡ-HEX Type]
Click here for details ☞
【Cleaning】
Dust Pump [P Type]
Click here for details ☞
【Hammering】
Anchor Hammer [AH Type]
Click here for details ☞
Designated Setting Tool
[DGA-H-SDS Type]
Click here for details ☞
Designated Setting Tool
[DGA-H-HEX Type]
Click here for details ☞