Fastener Products

Product Details

Adjust Anchor　AG／SAG Type

For concrete / Hammer the body type
  • Level of bolt can be easily set on uneven surfaces.
  • The standard embed. depth line is easily visible (There are no line marks on AG-850/1060 & SAG-640/1060).
［Application］
Installation for Exterior Wall Material / Floor Support Bracket / Thermal Insulation Bed Construction

❶Drill a hole
❷Clean the dust
❸Hammer the anchor
❹Use spanners to tighten up

AG/SAG Type

強度表をPDFで開く
Unit：mm Unit：kN
Thread D Min. embed. depth Max. load
Tensile strength
M6 9.5 35 10.7
M8 12.0 40 16.1
M10 14.5 45 19.1
・Fc=21N/mm2 concrete

AG TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. D L Screw-in adjustment
length		 Drilling
diameter		 Min. embed.
depth		 Drilling depth Qty・per
Box Carton
M6 AG-660 9.5 60 44 10.0 35 38 100 1,200
M6 AG-680 9.5 80 64 10.0 35 38 100 800
M6 AG-6100 9.5 100 84 10.0 35 38 100 600
M8 AG-850 12.0 50 30 12.5 40 44 100 800
M8 AG-8110 12.0 110 90 12.5 40 44 50 300
M10 AG-1060 14.5 60 38 15.0 45 50 50 300
SAG TYPE: STAINLESS STEEL SUSXM7・SUS304
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. D L Screw-in adjustment
length		 Drilling
diameter		 Min. embed.
depth		 Drilling depth Qty・per
Box Carton
M6 SAG-640 ※ 9.5 40 24 10.0 35 38 100 1,200
M8 SAG-870 12.0 70 50 12.5 40 44 50 400
M10 SAG-1060 14.5 60 38 15.0 45 50 50 300
※Limited Stock. This type is discontinued

【Drilling】
Anchor Drill Bit [ADX-SDS Type]
Click here for detail ☞
【Cleaning】
Dust Pump [P Type]
Click here for detail ☞
【Hammering】
Anchor Hammer [AH Type]
Click here for detail ☞
Designated Setting Tool [AG-H Type] (Bundled Item)
Click here for detail ☞