Fastener Products

Product Details

Bolt Anchor　BA／SBA／BA-D Type

For concrete / Hammer the sleeve type
  • Main dimensions are based on JCAA and SHASE-S standard products.
  • Following the tensile force, the expansion part opens and demonstrates stable strength.
  • By hammering the sleeve, it is securely fixed at the expansion part along with the taper part.
  • Quick installation hammering type.
［Application］
Installation for Soundproof Wall / Stadium Bench / Exterior Wall Stonework / Equipment Setup / Signboard, etc.

❶Drill a hole
❷Clean the dust
❸Hammer the anchor
❹Use spanners to tighten up
・Suggested installation torque
Thread Installation torque
N・m
M6 － 4 －
M8 － 9 －
M10 W3/8 18 14
M12 W1/2 31 34
M16 － 80 －
M20 － 150 －
M22 － 200 －
M24 － 260 －

BA/SBA/BA-D Type

強度表をPDFで開く
Unit：mm Unit：kN
Thread D Embed. depth Max. load
Tensile strength Shear strength
M6 9.5 30 9.7 6.9
M8 12.0 35 12.8 11.3
M10 14.0 40 17.6 17.8
M12 17.3 50 27.6 25.2
60 28.1
M16 21.7 50 28.4 45.1
60 36.3
M20 25.4 80 53.9 65.0
27.2 75 50.4
M22 31.8 90 59.8 88.1
32.0
M24 34.0 100 83.2 107.2
W3/8 14.0 40 17.6 15.0
W1/2 17.3 50 27.6 28.5
・Fc=21N/mm2 concrete

BA TYPE: STEEL
METRIC THREAD / TRIVALENT CHROMATE COATING
INCH THREAD / COLORED CHROMATE COATING
…JCAA Certified　…SHASE-S Standard
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. D L ℓ1 ℓ2 Max. fixture
thickness		 Drilling
diameter		 Embed. depth Drilling depth Width across flat
S		 Qty・per
Box Carton
M6 BA-650 9.5 50 25 30 8 10.0 30 33 10 100 600
M8 BA-865 12.0 65 35 35 15 12.5 35 39 13 100 400
M8 BA-870 12.0 70 40 35 20 12.5 35 39 13 100 400
M10 BA-1070 14.0 70 35 40 11 14.5 40 45 17 50 300
M10 BA-1080 14.0 80 45 40 21 14.5 40 45 17 50 200
M10 BA-1010 14.0 100 65 40 41 14.5 40 45 17 50 200
M10 BA-1012 14.0 120 85 40 61 14.5 40 45 17 50 200
M10 BA-1015 14.0 150 115 40 91 14.5 40 45 17 30 120
M12 BA-1280 17.3 80 35 50 6 18.0 50 56 19 30 120
M12 BA-1210 17.3 100 55 50 26 18.0 50 56 19 30 120
M12 BA-1212 17.3 120 75 50 46 18.0 50 56 19 30 120
M12 BA-1215 17.3 150 105 50 76 18.0 50 56 19 25 100
M12 BA-1216 17.3 160 115 50 86 18.0 50 56 19 25 100
M12 BA-1220 17.3 200 155 50 126 18.0 50 56 19 25 100
M16 BA-1610 21.7 100 50 50 20 22.5 50 58 24 20 60
M16 BA-1612 21.7 120 70 60 30 22.5 60 68 24 20 60
M16 BA-1615 21.7 150 100 60 60 22.5 60 68 24 20 60
M16 BA-1616 21.7 160 110 60 70 22.5 60 68 24 15 45
M16 BA-1620 21.7 200 150 60 110 22.5 60 68 24 15 45
M20 BA-2016 25.4 160 100 80 40 26.0 80 90 30 10 30
M20 BA-2020 25.4 200 140 80 80 26.0 80 90 30 10 30
W3/8 BA-3070 14.0 70 35 40 11 14.5 40 45 17 50 200
W3/8 BA-3080 14.0 80 45 40 21 14.5 40 45 17 50 200
W1/2 BA-4100 17.3 100 50 50 26 18.0 50 56 21 30 120
・Nut / washer / spring washer specifications　・Bolt protrusion from concrete surface dimension: L – Drilling depth
・Max. fixture thickness = L – Embed. depth – (Nut/ spring washer / washer) If extra screw length is required on the top of the nut after installation, subtract it from max. fixture thickness
SBA TYPE: STAINLESS STEEL SUSXM7・SUS304
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. D L ℓ1 ℓ2 Max. fixture
thickness		 Drilling
diameter		 Embed. depth Drilling depth Width across flat
S		 Qty・per
Box Carton
M6 SBA-650 9.5 50 25 30 8 10.0 30 33 10 100 600
M8 SBA-865 12.0 65 35 35 15 12.5 35 39 13 100 400
M8 SBA-870 12.0 70 40 35 20 12.5 35 39 13 100 400
M8 SBA-810 12.0 100 70 35 50 12.5 35 39 13 50 300
M10 SBA-1070 14.0 70 40 40 11 14.5 40 45 17 50 300
M10 SBA-1080 14.0 80 50 40 21 14.5 40 45 17 50 200
M10 SBA-1010 14.0 100 70 40 41 14.5 40 45 17 50 200
M10 SBA-1012 14.0 120 90 40 61 14.5 40 45 17 50 200
M10 SBA-1015 14.0 150 120 40 91 14.5 40 45 17 30 120
M12 SBA-1210 17.3 100 55 50 26 18.0 50 56 19 30 120
M12 SBA-1212 17.3 120 75 50 46 18.0 50 56 19 30 120
M12 SBA-12125 17.3 125 75 60 36 18.0 60 67 19 30 120
M12 SBA-1215 17.3 150 105 50 76 18.0 50 56 19 25 100
M12 SBA-1216 17.3 160 115 50 86 18.0 50 56 19 25 100
M12 SBA-1220 17.3 200 155 50 126 18.0 50 56 19 25 100
M16 SBA-1610 21.7 100 50 50 20 22.5 50 58 24 20 60
M16 SBA-1612 21.7 120 70 60 30 22.5 60 68 24 20 60
M16 SBA-16125 21.7 125 75 60 35 22.5 60 68 24 20 60
M16 SBA-1615 21.7 150 100 60 60 22.5 60 68 24 20 60
M16 SBA-1616 21.7 160 110 60 70 22.5 60 68 24 15 45
M16 SBA-1620 21.7 200 150 60 110 22.5 60 68 24 15 45
M20 SBA-2016 25.4 160 100 80 40 26.0 80 90 30 10 30
M20 SBA-2017 ※ 27.2 170 100 75 50 28.0 75 88 30 10 30
M20 SBA-2020 27.2 200 130 75 80 28.0 75 88 30 10 30
M22 SBA-2220 32.0 200 120 90 62 33.0 90 103 32 5 15
M24 SBA-2420 34.0 200 110 100 47 35.0 100 115 36 5 15
・Nut / washer / spring washer specifications　・Bolt protrusion from concrete surface dimension: L – Drilling depth
・Max. fixture thickness = L – Embed. depth – (Nut/ spring washer / washer) If extra screw length is required on the top of the nut after installation, subtract it from max. fixture thickness
※It is a made-to-order product
BA-D TYPE: STEEL / HOT-DIP GALVANIZING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. D L ℓ1 ℓ2 Max. fixture
thickness		 Drilling
diameter		 Embed. depth Drilling depth Width across flat Qty・per
Box Carton
M8 BA-865D 12.0 65 35 35 15 12.5 35 39 13 100 400
M8 BA-870D 12.0 70 40 35 20 12.5 35 39 13 100 400
M10 BA-1070D 14.0 70 35 40 11 14.5 40 45 17 50 300
M10 BA-1080D 14.0 80 45 40 21 14.5 40 45 17 50 200
M10 BA-1010D 14.0 100 65 40 41 14.5 40 45 17 50 200
M10 BA-1012D 14.0 120 85 40 61 14.5 40 45 17 50 200
M12 BA-1210D 17.3 100 55 50 26 18.0 50 56 19 30 120
M12 BA-1212D 17.3 120 75 50 46 18.0 50 56 19 30 120
M12 BA-12125D 17.3 125 75 60 36 18.0 60 67 19 30 120
M12 BA-1215D 17.3 150 105 50 76 18.0 50 56 19 25 100
M12 BA-1216D ※ 17.3 160 115 50 86 18.0 50 56 19 25 100
M12 BA-1220D ※ 17.3 200 155 50 126 18.0 50 56 19 25 100
M16 BA-1610D 21.7 100 50 50 20 22.5 50 58 24 20 60
M16 BA-1612D 21.7 120 70 60 30 22.5 60 68 24 20 60
M16 BA-16125D 21.7 125 75 60 35 22.5 60 68 24 20 60
M16 BA-1615D 21.7 150 100 60 60 22.5 60 68 24 20 60
M16 BA-1616D ※ 21.7 160 110 60 70 22.5 60 68 24 15 45
M16 BA-1620D ※ 21.7 200 150 60 110 22.5 60 68 24 15 45
M20 BA-2016D ※ 25.4 160 100 80 40 26.0 80 90 30 10 30
M20 BA-2017D ※ 27.2 170 100 75 50 28.0 75 88 30 10 30
M20 BA-2020D ※ 27.2 200 130 75 80 28.0 75 88 30 10 30
M22 BA-2220D 31.8 200 110 90 62 33.0 90 103 32 5 15
M24 BA-2420D 34.0 200 100 100 47 35.0 100 115 36 5 15
・Nut / washer / spring washer specifications　・Bolt protrusion from concrete surface dimension: L – Drilling depth　※It is a made-to-order product
・Max. fixture thickness = L – Embed. depth – (Nut/ spring washer / washer) If extra screw length is required on the top of the nut after installation, subtract it from max. fixture thickness

【Drilling】
Anchor Drill Bit [ADXⅡ-HEX Type] [ADXⅡ-MAX Type]
Click here for detail ☞
【Cleaning】
Dust Pump [P Type]
Click here for detail ☞
【Hammering】
Anchor Hammer [AH Type]
Click here for detail ☞
Designated Setting Tool [BA-MH Type]
Click here for detail ☞

Designated Setting Tool
［BA-MH-SDS Type］［BA-MH-HEX Type]［BA-MH-MAX Type］
Click here for detail ☞