No Plug Screw PPV／PFV／PHV／PWV／PFV-NC／PP-S／PF-S／PW-S／PF-NSC

For concrete, block and wood / Screw fixing type

Since no plug is required, the drilling diameter may be small.
Firmly adheres to the fixture with both high and low double thread.
Even if the fixture is a thin plate, the head is not noticeable. (PFV-NC/PF-NSC)

［Application］

Saddle Fastening for Wiring and Piping / Signboard / Interior Base Material / Lighting Equipment / Non-slip Stair Treads (PFV-NC)

Installation Procedure

❶Drill a hole

❷Clean the dust

❸Tighten the screw

❹Installation complete

●Use a screwdriver to manually install a size 4.0 thread.
●Perform drilling with the specified drilling diameter. If it is too large, the holding power will decrease.

❸Tighten the screw with socket

❹Installation complete

Mechanical Properties

強度表をPDFで開く

Thread	Embed. depth	Max. load
	Unit：mm	Unit：kN
Thread	Embed. depth	Tensile strength
4.0	22	1.7
4.0	30	2.8
5.0	22	2.0
5.0	30	3.3
6.0	30	3.4
6.0	40	5.3

・Fc=21N/mm² concrete

Box Product

No Plug Screw Pro Box

Thread	Item no.	Qty. per
		Unit：pcs	Unit：box
Thread	Item no.	Box	Carton
4.0	PPV-4x25PRO	1,000	6
	PPV-4x32PRO
	PFV-4x25PRO
	PFV-4x32PRO
5.0	PFV-5x45PRO	500
5.0	PFV-5x60PRO	400

Size Chart

PPV TYPE: STEEL / CORROSION PROTECTION COATING
PP-S TYPE: STAINLESS STEEL SUS410

サイズ表をPDFで開く

Open chart in PDF

								Unit：mm		Unit：pc		Unit：pack
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Blister pack	Medium box	Carton
4.0	PPV-425	25	22	7.2	2.6	3.4	22	35-t	TB-2	200	10	30
4.0	PPV-432	32	29	7.2	2.6	3.4	30	42-t	TB-2	200	10	30
4.0	PPV-438	38	29	7.2	2.6	3.4	30	48-t	TB-2	100	10	30
4.0	PPV-445	45	35	7.2	2.6	3.4	30	55-t	TB-2	100	10	30
5.0	PPV-525	25	23	9.0	3.3	4.3	22	35-t	TB-2	100	10	30
5.0	PPV-535	35	30	9.0	3.3	4.3	30	45-t	TB-2	100	10	30
5.0	PPV-545	45	40	9.0	3.3	4.3	30	55-t	TB-2	100	10	30
5.0	PPV-560	60	40	9.0	3.3	4.3	30	70-t	TB-2	50	10	30
5.0	PPV-575	75	40	9.0	3.3	4.3	30	85-t	TB-2	50	10	30
4.0	PP-425S	25	22	7.2	2.6	3.4	22	35-t	TB-2	200	10	30
4.0	PP-432S	32	29	7.2	2.6	3.4	30	42-t	TB-2	200	10	30
4.0	PP-438S	38	29	7.2	2.6	3.4	30	48-t	TB-2	100	10	30
4.0	PP-445S	45	35	7.2	2.6	3.4	30	55-t	TB-2	100	10	30
5.0	PP-525S	25	23	9.0	3.3	4.3	22	35-t	TB-2	100	10	30
5.0	PP-535S	35	30	9.0	3.3	4.3	30	45-t	TB-2	100	10	30
5.0	PP-545S	45	40	9.0	3.3	4.3	30	55-t	TB-2	100	10	30
5.0	PP-560S	60	40	9.0	3.3	4.3	30	70-t	TB-2	50	10	30
5.0	PP-575S	75	40	9.0	3.3	4.3	30	85-t	TB-2	50	10	30
								・Drilling depth=L+10mm-fixture thickness t

PFV TYPE: STEEL / CORROSION PROTECTION COATING
PF-S TYPE: STAINLESS STEEL SUS410

サイズ表をPDFで開く

Open chart in PDF

【PACK】								Unit：mm		Unit：pc		Unit：pack
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Blister pack	Medium box	Carton
4.0	PFV-425	25	22	7.0	2.3	3.4	22	35-t	TB-2	200	10	30
4.0	PFV-432	32	29	7.0	2.3	3.4	30	42-t	TB-2	200	10	30
4.0	PFV-438	38	29	7.0	2.3	3.4	30	48-t	TB-2	100	10	30
4.0	PFV-445	45	35	7.0	2.3	3.4	30	55-t	TB-2	100	10	30
5.0	PFV-525	25	22	9.0	2.9	4.3	22	35-t	TB-2	100	10	30
5.0	PFV-535	35	30	9.0	2.9	4.3	30	45-t	TB-2	100	10	30
5.0	PFV-545	45	40	9.0	2.9	4.3	30	55-t	TB-2	100	10	30
5.0	PFV-560	60	40	9.0	2.9	4.3	30	70-t	TB-2	50	10	30
5.0	PFV-575	75	40	9.0	2.9	4.3	30	85-t	TB-2	50	10	30

サイズ表をPDFで開く

PFV TYPE: STEEL / CORROSION PROTECTION COATING
PF-S TYPE: STAINLESS STEEL SUS410

Open chart in PDF

【BOX】								Unit：mm				Unit：pc
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Box	Medium box	Carton
6.0	PFV-6X35	35	30	12.0	4.1	5.3	30	45-t	KTB-3	100	ー	1,000
6.0	PFV-6X45	45	40	12.0	4.1	5.3	40	55-t	KTB-3	100	ー	1,000
6.0	PFV-6X60	60	40	12.0	4.1	5.3	40	70-t	KTB-3	100	ー	1,000
6.0	PFV-6X70	70	40	12.0	4.1	5.3	40	80-t	KTB-3	100	ー	1,000
6.0	PFV-6X75	75	40	12.0	4.1	5.3	40	85-t	KTB-3	100	ー	1,000
6.0	PFV-6X90	90	70	12.0	4.1	5.3	40	100-t	KTB-3	100	ー	1,000
6.0	PFV-6X100	100	70	12.0	4.1	5.3	40	110-t	KTB-3	100	ー	1,000
6.0	PFV-6X110	110	70	12.0	4.1	5.3	40	120-t	KTB-3	100	ー	1,000
6.0	PFV-6X120	120	70	12.0	4.1	5.3	40	130-t	KTB-3	100	ー	1,000

サイズ表をPDFで開く

PFV TYPE: STEEL / CORROSION PROTECTION COATING
PF-S TYPE: STAINLESS STEEL SUS410

Open chart in PDF

【PACK】								Unit：mm		Unit：pc		Unit：pack
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Blister pack	Medium box	Carton
4.0	PF-425S	25	22	7.0	2.3	3.4	22	35-t	TB-2	200	10	30
4.0	PF-432S	32	29	7.0	2.3	3.4	30	42-t	TB-2	200	10	30
4.0	PF-438S	38	29	7.0	2.3	3.4	30	48-t	TB-2	100	10	30
4.0	PF-445S	45	35	7.0	2.3	3.4	30	55-t	TB-2	100	10	30
5.0	PF-525S	25	22	9.0	2.9	4.3	22	35-t	TB-2	100	10	30
5.0	PF-535S	35	30	9.0	2.9	4.3	30	45-t	TB-2	100	10	30
5.0	PF-545S	45	40	9.0	2.9	4.3	30	55-t	TB-2	100	10	30
5.0	PF-560S	60	40	9.0	2.9	4.3	30	70-t	TB-2	50	10	30
5.0	PF-575S	75	40	9.0	2.9	4.3	30	85-t	TB-2	50	10	30

PFV TYPE: STEEL / CORROSION PROTECTION COATING
PF-S TYPE: STAINLESS STEEL SUS410

サイズ表をPDFで開く

Open chart in PDF

【BOX】								Unit：mm				Unit：pc
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Box	Medium box	Carton
6.0	PF-6X110S	110	70	12.0	4.1	5.3	40	120-t	KTB-3	100	ー	1,000
								・Drilling depth=L+10mm-fixture thickness t

PHV TYPE: STEEL / CORROSION PROTECTION COATING

サイズ表をPDFで開く

Open chart in PDF

【BOX】								Unit：mm				Unit：pc
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Box	Medium box	Carton
6.0	PHV-6X35	35	30	10.5	4.5	5.3	30	45-t	KTB-8G(width across flat 8)	100	ー	1,000
6.0	PHV-6X45	45	40	10.5	4.5	5.3	40	55-t	KTB-8G(width across flat 8)	100	ー	1,000
6.0	PHV-6X60	60	40	10.5	4.5	5.3	40	70-t	KTB-8G(width across flat 8)	100	ー	1,000
6.0	PHV-6X70	70	40	10.5	4.5	5.3	40	80-t	KTB-8G(width across flat 8)	100	ー	1,000
								・Drilling depth=L+10mm-fixture thickness t

PWV TYPE: STEEL / CORROSION PROTECTION COATING
PW-S TYPE: STAINLESS STEEL SUS410

サイズ表をPDFで開く

Open chart in PDF

								Unit：mm		Unit：pc		Unit：pack
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Blister pack	Medium box	Carton
4.0	PWV-425	25	21.5	9.6	3.0	3.4	22	35-t	TB-2	200	10	30
4.0	PWV-432	32	29	9.6	3.0	3.4	30	42-t	TB-2	100	10	30
4.0	PWV-445	45	35	9.6	3.0	3.4	30	55-t	TB-2	100	10	30
4.0	PW-425S	25	21.5	9.6	3.0	3.4	22	35-t	TB-2	200	10	30
4.0	PW-432S	32	29	9.6	3.0	3.4	30	42-t	TB-2	100	10	30
4.0	PW-445S	45	35	9.6	3.0	3.4	30	55-t	TB-2	100	10	30
								・Drilling depth=L+10mm-fixture thickness t

PFV-NC TYPE: STEEL / CORROSION PROTECTION COATING
PF-NSC TYPE: STAINLESS STEEL SUSXM7

サイズ表をPDFで開く

Open chart in PDF

								Unit：mm		Unit：pc		Unit：pack
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Qty・per
Thread	Item no.	L	ℓ	dk	ｋ	Drilling diameter	Embed. depth	Drilling depth	Recommended screwdriver bit	Blister pack	Medium box	Carton
4.0	PFV-425NC	25	22	5.9	1.6	3.4	22	35-t	TB-2	200	10	30
4.0	PFV-432NC	32	29	5.9	1.6	3.4	30	42-t	TB-2	200	10	30
4.0	PF-425NSC ※	25	22	5.9	1.6	3.4	22	35-t	TB-2	200	10	30
4.0	PF-432NSC ※	32	29	5.9	1.6	3.4	30	42-t	TB-2	200	10	30
※ PF-NSC type is for mortar, block and wood.								・Drilling depth=L+10mm-fixture thickness t

Product Details