Smart Plug SMT

Smart Plug　SMT

For concrete, ALC panels, hollow walls, gypsum boards, extruded cement boards / Screw-in type

Can be used for various base materials.
Demonstrates a stable holding power with triple expansion.

［Application］

Installation for Water Heater Fall Prevention Metal Fittings / Interior Decoration / Lighting Equipment / Bulletin Board, etc.

Installation Procedures

❶Drill a hole

❷Clean the dust

❸Insert the plug

❹Tighten the screw

Mechanical Properties

SMT Type

Concrete / ALC panel

強度表をPDFで開く

D	Embed. depth	Screw diameter	Max. load
		Unit：mm		Unit：kN
D	Embed. depth	Screw diameter	Tensile strength
5.0	25	3.0	1.0	0.6
5.0	25	4.0	1.9	0.7
6.0	30	4.0	1.9	0.9
6.0	30	5.0	3.7	1.1
8.0	40	5.0	4.3	1.4
8.0	40	6.0	6.8	1.5
10.0	50	6.0	5.7	2.1
10.0	50	8.0	12.7	2.6
			・Concrete strength：Fc = 21N / mm²	・ALC panel compressive strength Fc = 4N / mm²

Gypsum board

強度表をPDFで開く

D	Screw diameter	Max. load	Test base material
	Unit：mm	Unit：kN
D	Screw diameter	Tensile strength	Test base material
5.0	3.1	0.16	Gypsum board 12.5mm
5.0	3.8	0.17
6.0	4.1	0.22
6.0	4.8	0.24
8.0	5.1	0.31
8.0	5.8	0.33
10.0	6.2	0.34	Gypsum board 15.0mm

Size Chart

SMT TYPE: NYLON

サイズ表をPDFで開く

Open chart in PDF

						Unit：mm	Unit：pc	Unit：pack
D	Item no.	L	Screw diameter	Drilling diameter	Embed. depth	Min. drilling depth	Qty・per
D	Item no.	L	Screw diameter	Drilling diameter	Embed. depth	Min. drilling depth	Blister pack	Carton
5.0	SMT-5X25	25	3.0～4.0（3.1～3.8）	5.0	25	30	180	15
6.0	SMT-6X30	30	4.0～5.0（4.1～4.8）	6.0	30	35	120	15
8.0	SMT-8X40	40	5.0～6.0（5.1～5.8）	8.0	40	45	70	15
10.0	SMT-10X50	50	6.0～8.0（6.2）	10.0	50	55	35	15

・() is the diameter of the screw used for the hollow wall.

SMT Type: Nylon

Open chart in PDF

						Unit：mm	Unit：pc		Unit：pack
D	Item no.	L	Screw diameter	Drilling diameter	Embed. depth	Min. drilling depth	Qty・per
D	Item no.	L	Screw diameter	Drilling diameter	Embed. depth	Min. drilling depth	Blister pack	Medium box	Carton
5.0	SMT-5X25B-P24	25	3.0～4.0（3.1～3.8）	5.0	25	30	24	6	60
6.0	SMT-6X30B-P16	30	4.0～5.0（4.1～4.8）	6.0	30	35	16	6	60

・SMT-5x25B-P24 (with screws) and SMT-6x30B-P16 (with screws) are display set products. Orders are accepted in units of 6 packs.
・() is the diameter of the screw used for the hollow wall. ※Low stock/Display set products will be discontinued as soon as the stock runs out.

・Adaptive plate thickness

Item no.	Min. gypsum board thickness	Min. other hollow wall thickness
		Unit：mm
SMT-5×25	12.5	6
SMT-6×30		8
SMT-8×40		10
SMT-10×50	15.0	12

・List of adaptive plate thickness and fixture thickness by screw used in hollow part of extruded cement plate

Item no.	Screw diameter	Screw length	Recommended plate thickness				Fixture thickness
						Unit：mm
Item no.	Screw diameter	Screw length	50	60	75	100	Fixture thickness
SMT-5X25	3.1～3.8	28	●	●	●	●	～3
		32	●	●	●	●	～7
		38		●	●	●	～13
SMT-6X30	4.1～4.8	32	●	●	●	●	～2
		38		●	●	●	～8
		40		●	●	●	～10
		45		●	●	●	～15
SMT-8X40	5.1～5.8	45		●	●	●	～5
		50			●	●	～10
		56			●	●	～16
SMT-10X50	6.2	56			●	●	～6
		63				●	～13
		70				●	～20
		75				●	～25

●The part is the recommended plate thickness.

Product Details