Fastener Products

Product Details

Hollow Wall Anchor　IT／IT-S／ITW-S

For hollow wall / Toggle (roll plate) fixing type
  • The main body and roll plate have the same diameter, so it can be installed with the fixture set. (IT)
  • Can be installed on walls and floors.
  • The roll plate part has a double structure to improve holding power. (ITW-S)
［Application］
Installation for Handrail / Bracket / Distribution Board / Hollow Walls such as Bulletin Boards

IT/IT-S
❶Drill a hole
※ Please use the designated drill bit when drilling holes in each base material.
　
❷Insert anchor in the hole
　
❸When the roll plate part comes out in the hollow, it rotates naturally
　
❹Installation complete
・Suggested installation torque
IT/IT-S Type
Thread Installation torque　N・m
M6 2.5
M8 6.5
M10・W3/8 10.0
M12 20.0
ITW-S
❶Drill a hole
※ Please use the designated drill bit when drilling holes in each base material.
　
❷Insert anchor in hole
　
❸When the roll plate part comes out in the hollow, it rotates naturally.
　
❹Installation complete
・Suggested installation torque
ITW-S Type
Thread Installation torque　N・m
M6 4.5
M8 8.0
M10 19.0

IT/IT-S Type

強度表をPDFで開く
Unit：kN
Thread Max. load
Tensile strength
M6 2.9（IT-S）
3.5（IT）
M8 4.4
M10・W3/8 5.2
M12 6.6
・Steel plate or plate bearing capacity

ITW-S Type

強度表をPDFで開く
Unit：kN
Thread Max. load
Tensile strength
M6 3.3
M8 3.5
M10 9.1
・Until steel plate or rivet breaks

ITW-S TYPE: STAINLESS STEEL / BODY: SUSXM7 / PLATE: SUS304
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. L Under-neck
length		 ℓ Grip length Conical nut
height		 C S Hollow width required
for installation		 Drilling
diameter		 Qty・per
Box Carton
M6 ITW-625S 25 18 12 6〜8 6.5 20 10 23 9.5 50 800
M6 ITW-630S 30 23 17 6〜13 6.5 20 10 23 9.5 50 800
M6 ITW-640S 40 33 27 6〜23 6.5 20 10 23 9.5 50 800
M6 ITW-650S 50 43 37 6〜33 6.5 20 10 23 9.5 50 800
M8 ITW-840S 40 31 21 10〜17 8.5 30 12 33 12.0 50 400
M8 ITW-850S 50 41 30 11〜27 8.5 30 12 33 12.0 50 400
M8 ITW-860S 60 51 40 11〜37 8.5 30 12 33 12.0 50 400
M8 ITW-870S 70 61 50 11〜47 8.5 30 12 33 12.0 50 400
M8 ITW-880S 80 71 60 11〜57 8.5 30 12 33 12.0 50 400
M10 ITW-1050S 50 38 26 12〜18 10.4 40 14 43 15.0 50 300
M10 ITW-1070S 70 58 46 12〜38 10.4 40 14 43 15.0 50 300
M10 ITW-1090S 90 78 66 12〜58 10.4 40 14 43 15.0 50 200
M10 ITW-1010S 100 88 76 12〜68 10.4 40 14 43 15.0 50 200

・Conical nut
IT TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. L Under-neck
length		 ℓ Grip length Conical nut
height		 C S Hollow width required
for installation		 Drilling
diameter		 Qty・per
Box Carton
M6 IT-630 30 23 13 10〜12 6.5 24 10 26 7.5 50 800
M6 IT-640 40 33 23 10〜22 6.5 24 10 26 7.5 50 800
M6 IT-650 50 43 33 10〜32 6.5 24 10 26 7.5 50 800
M8 IT-835 35 27 15 12〜13 8.5 30 12 32 9.0 50 400
M8 IT-840 40 32 20 12〜18 8.5 30 12 32 9.0 50 400
M8 IT-845 45 37 25 12〜23 8.5 30 12 32 9.0 50 400
M8 IT-850 50 42 30 12〜28 8.5 30 12 32 9.0 50 400
M8 IT-855 55 47 35 12〜33 8.5 30 12 32 9.0 50 400
M8 IT-860 60 52 40 12〜38 8.5 30 12 32 9.0 50 400
M8 IT-865 65 57 45 12〜43 8.5 30 12 32 9.0 50 400
M8 IT-870 70 62 50 12〜48 8.5 30 12 32 9.0 50 400
M8 IT-875 75 67 55 12〜53 8.5 30 12 32 9.0 50 400
M8 IT-880 80 72 60 12〜58 8.5 30 12 32 9.0 50 400
M8 IT-890 90 82 60 22〜68 8.5 30 12 32 9.0 50 400
M8 IT-810 100 92 70 22〜78 8.5 30 12 32 9.0 50 400
M10 IT-1050 50 40 26 14〜23 10.4 36 14 38 11.0 50 300
M10 IT-1070 70 60 46 14〜43 10.4 36 14 38 11.0 50 300
M10 IT-1090 90 80 66 14〜63 10.4 36 14 38 11.0 50 300
M10 IT-1010 100 90 76 14〜73 10.4 36 14 38 11.0 50 300
M12 IT-1250 50 38 23 15〜20 12.3 37 19 39 13.5 30 180
M12 IT-1270 70 58 43 15〜40 12.3 37 19 39 13.5 30 180
M12 IT-1210 100 88 73 15〜70 12.3 37 19 39 13.5 30 180
W3/8 IT-3050 50 40 26 14〜23 10.4 36 14 38 11.0 50 300

・Conical nut
IT-S TYPE: STAINLESS STEEL / BODY: SUSXM7 / PLATE: SUS304
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. L Under-neck
length		 ℓ Grip length Conical nut
height		 C S Hollow width required
for installation		 Drilling
diameter		 Qty・per
Box Carton
M6 IT-630S 30 23 13 10〜12 6.5 24 10 26 7.5 50 800
M6 IT-640S 40 33 23 10〜22 6.5 24 10 26 7.5 50 800
M6 IT-650S 50 43 33 10〜32 6.5 24 10 26 7.5 50 800
M8 IT-840S 40 32 20 12〜18 8.5 30 12 32 9.0 50 400
M8 IT-850S 50 42 30 12〜28 8.5 30 12 32 9.0 50 400
M8 IT-860S 60 52 40 12〜38 8.5 30 12 32 9.0 50 400
M8 IT-870S 70 62 50 12〜48 8.5 30 12 32 9.0 50 400
M8 IT-880S 80 72 60 12〜58 8.5 30 12 32 9.0 50 400
M8 IT-890S 90 82 60 22〜68 8.5 30 12 32 9.0 50 400
M8 IT-810S 100 92 70 22〜78 8.5 30 12 32 9.0 50 400
M10 IT-1050S 50 40 26 14〜23 10.4 36 14 38 11.0 50 300
M10 IT-1070S 70 60 46 14〜43 10.4 36 14 38 11.0 50 300
M10 IT-1090S 90 80 66 14〜63 10.4 36 14 38 11.0 50 300
M10 IT-1010S 100 90 76 14〜73 10.4 36 14 38 11.0 50 300
M12 IT-1250S 50 38 23 15〜20 12.3 37 19 39 13.5 30 180
M12 IT-1270S 70 58 43 15〜40 12.3 37 19 39 13.5 30 180
M12 IT-1210S 100 88 73 15〜70 12.3 37 19 39 13.5 30 180
W3/8 IT-3050S 50 40 26 14〜23 10.4 36 14 38 11.0 50 300

・Conical nut

【Tightening】

・Conical Nut

BN Type
SBN Type
Click here for detail ☞