Fastener Products

Product Details

Hollow Wall Anchor　ITL-W／ITL-M／ITL-MS

For ALC panel / Toggle (roll plate) fixing type
  • Tightening penetration installation does not damage the ALC panel.
  • Good workability due to its spring effect.
  • Can be installed on walls and floors.
  • The bolt embed. depth can be finely adjusted.
［Application］
Installation for Distribution Board / Rain Gutter / Signboard

ITE-W
❶Drill a hole
ITL-W
❷ Insert anchor in the hole
ITE-W
❸When the roll plate part goes out to the hollow, it rotates naturally and the main body returns due to the spring effect
ITE-W
❹Installation complete
ITE-WS
❷Insert the anchor in the hole
※Do not forcefully press the plate into the lower slot.
ITE-WS
❸When the roll plate part goes out to the hollow, it rotates naturally and the main body returns due to the spring effect.
ITE-WS
❹Installation complete
ITL-M/ITL-MS
❷ Insert the anchor in the hole
ITL-M/ITL-MS
❸When the roll plate part goes out to the hollow, it rotates naturally and the main body returns due to the spring effect
ITL-M/ITL-MS
❹Installation complete

 

・Suggested installation torque
ITL-W/ITE-WS/ITL-WS/ITL-M/ITL-MS Type
Thread Installation torque　N・m
M6 1.5
M8 5.0
M10・W3/8 15.0

ITL-W/ITE-WS/ITL-M/ITL-MS Type

強度表をPDFで開く
Unit：mm Unit：kN
Thread ALC panel thickness Max. Load
Tensile strength Shear strength
M6 100 1.7 2.5
M8 50 2.9 3.3
75～100 3.3
M10・W3/8 50 4.0 4.3
75～150 5.7 5.3
・ALC panel compressive strength Fc = 4N / mm2

ITL-W TYPE (INTERNAL THREAD) : STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. L ℓ C Hollow width required
for installation		 ALC panel
thickness		 Drilling
diameter		 Qty・per
Box Carton
M6 ITL-610W 98 27 40 42 100 13.0 30 180
M10 ITL-1075W 73 20 55 57 75 17.0 25 150
M10 ITL-1010W 92 20 55 57 100 17.0 25 150
M10 ITL-1015W 142 20 55 57 150 17.0 25 100
W3/8 ITL-3010W 92 20 55 57 100 17.0 25 150

・No nut/washer
ITE-WS/ITL-WS TYPE (INTERNAL THREAD)
STAINLESS STEEL/ BODY: SUSXM7/SUS304 /PLATE: SUS304
サイズ表をPDFで開く

表をPDFで開く

Unit：mm Unit：pc
Thread Item no. L ℓ C Hollow width required
for installation		 ALC panel
thickness		 Drilling
diameter		 Qty・per
Box Carton
W3/8 ITE-3050WS 42 20 50 52 50 18.0 10 160
M10 ITL-1010WS 92 20 55 57 100 17.0 25 150
W3/8 ITL-3010WS 92 20 55 57 100 17.0 25 150
・No nut/washer
ITL-M TYPE (EXTERNAL THREAD): STEEL/ TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. L ℓ Conical nut
height		 C S Hollow width required
for installation		 ALC panel thickness Max. fixture
thickness		 Drilling
diameter		 Qty・per
Box Carton
M6 ITL-613M 128 90 6.5 40 10 42 100 10 13.0 30 180
M10 ITL-1085M 85 54 10.4 55 14 57 50 10 17.0 25 150
M10 ITL-1011M 110 79 10.4 55 14 57 75 10 17.0 25 150
M10 ITL-10135M 135 90 10.4 55 14 57 100 10 17.0 25 100
M10 ITL-1016M 160 90 10.4 55 14 57 125 10 17.0 25 100
M10 ITL-10185M 185 90 10.4 55 14 57 150 10 17.0 25 100

・Conical nut specifications
ITL-MS TYPE (EXTERNAL THREAD): STAINLESS STEEL/ BODY: SUSXM7・SUS304/ PLATE: SUS304
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
Thread Item no. L ℓ Conical nut
height		 C S Hollow width required
for installation		 ALC panel thickness Max. fixture
thickness		 Drilling
diameter		 Qty・per
Box Carton
M6 ITL-613MS 128 90 6.5 40 10 42 100 10 13.0 30 180
M8 ITL-885MS 85 56 8.5 45 12 47 50 10 16.0 50 200
M8 ITL-811MS 110 81 8.5 45 12 47 75 10 16.0 50 200
M8 ITL-8135MS 135 96 8.5 45 12 47 100 10 16.0 50 200
M10 ITL-10135MS 135 90 10.4 55 14 57 100 10 17.0 25 100
M10 ITL-1016MS 160 90 10.4 55 14 57 125 10 17.0 25 100
M10 ITL-10185MS 185 90 10.4 55 14 57 150 10 17.0 25 100

・Conical nut specifications

【Drilling】
Anchor Drill Bit [ADX-SDS Type]
Click here for detail ☞
All Drill Bit [SDS Type (Rotational use)]
Click here for detail ☞
【Tightening】

・Conical Nut

BN Type
SBN Type
Click here for detail ☞