Fastener Products

Product Details

Hollow Wall Anchor　ITA-V／ITA-VS／ITA-R／ITA-RS

For extruded cement panels / Toggle (roll plate) fixing Type
  • ITA-V+D/ITA-VS+D are recommended by ECPA (Extruded Cement Plate Association).
  • The roll plate part has a double structure to exhibit a strong holding power.
  • The roll plate part is shortened for extrusion cement board., so it can be easily installed.
  • Provided with 1 designated drill bit per box.
［Application］
Installation for Handrail/ Bracket/ Hollow Walls such as Bulletin Boards, etc.

❶Drill a hole
❷Insert anchor in the hole
❸When the roll plate part comes out in the hollow, it rotates naturally
❹Installation complete
・Suggested installation torque
Installation torque　N・m
M8 8
M10 15

ITA-V(S)+D Type

強度表をPDFで開く
Unit：kN
Thread Max. load
tensile strength		 Allowable
tensile load
M8 4.22 0.8
M10 4.26
・This is an experimental value using an extrusion cement board with a thickness of 60 mm, and is not a guaranteed value. (Base metal destruction)
・Use a designated drill bit (Amera Drill AMD type)
※This is the allowable tensile load recommended by the Extruded Cement Board Association.

ITA-R(S)+D Type

強度表をPDFで開く
Unit：kN
Thread Max. load
tensile strength		 Allowable
tensile load
– – 0.8
M10 4.0
・Catalog value for extrusion cement board 50mm thick. (Base metal destruction)
・Use a designated drill bit (Amera Drill AMD type)

ITA-V+D TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：小箱
Thread Item no. L Under-neck
length		 ℓ Grip length Conical nut
height		 C S Hollow width required
for installation		 Drilling
diameter		 Designated drill bit
(1 pc. provided
per box)		 Qty・per
Box
(Hollow Wall Anchor qty.)		 Carton
M8 ITA- 870V+D 72 62 50 15~45 8.5 30 12 30 12.0 AMD-12.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
M10 ITA-1050V+D 52 40 23 17~23 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
M10 ITA-1070V+D 72 60 43 17~43 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
M10 ITA-1010V+D 102 90 73 17~73 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(30pc. Hollow Wall Anchor)		 6
W3/8 ITA-3050V+D 52 40 23 17~23 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
W3/8 ITA-3070V+D 72 60 43 17~43 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
W3/8 ITA-3010V+D 102 90 73 17~73 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(30pc. Hollow Wall Anchor)		 6

・Cannot be used on plates thinner than the grip length.　・Conical nut
ITA-VS+D TYPE　STAINLESS STEEL / BODY: SUSXM7 / PLATE: SUS304
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：小箱
Thread Item no. L Under-neck
length		 ℓ Grip length Conical nut
height		 C S Hollow width required
for installation		 Drilling
diameter		 Designated drill bit
(1 pc. provided
per box)		 Qty・per
Box
(Hollow Wall Anchor qty.)		 Carton
M8 ITA- 870VS+D 72 62 50 15~45 8.5 30 12 30 12.0 AMD-12.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
M10 ITA-1050VS+D 52 40 23 17~23 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
M10 ITA-1070VS+D 72 60 43 17~43 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
M10 ITA-1010VS+D 102 90 73 17~73 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(30pc. Hollow Wall Anchor)		 6
W3/8 ITA-3050VS+D 52 40 23 17~23 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
W3/8 ITA-3070VS+D 72 60 43 17~43 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6
W3/8 ITA-3010VS+D 102 90 73 17~73 10.4 30 14 30 15.0 AMD-15.0X120 1 designated drill bit
(30pc. Hollow Wall Anchor)		 6

・Cannot be used on plates thinner than the grip length.　・Conical nut
ITA-R+D TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：小箱
Thread Item no. L Under-neck
length		 ℓ Grip length Conical nut
height		 C S Hollow width required
for installation		 Drilling
diameter		 Designated drill bit
(1 pc. provided
per box)		 Qty・per
Box
(Hollow Wall Anchor qty.)		 Carton
M10 ITA-1050R+D 50 41 30 11~26 10.4 24 14 24 13.5 AMD-13.5X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6

・Cannot be used on plates thinner than the grip length.　・Conical nut
ITA-RS+D TYPE　STAINLESS STEEL / BODY: SUSXM7・SUS304 / PLATE: SUS304
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：小箱
Thread Item no. L Under-neck
length		 ℓ Grip length Conical nut
height		 C S Hollow width required
for installation		 Drilling
diameter		 Designated drill bit
(1 pc. provided
per box)		 Qty・per
Box
(Hollow Wall Anchor qty.)		 Carton
M10 ITA-1050RS+D 50 41 30 11~26 10.4 24 14 24 13.5 AMD-13.5X120 1 designated drill bit
(50pc. Hollow Wall Anchor)		 6

・Cannot be used on plates thinner than the grip length.　・Conical nut

 

※The item number in the technical data is only for the Hollow Wall Anchor itself. (+D is not included)

【Drilling】
AMD Drill Bit［AMD Type（Rotational use）］
Click here for detail ☞
【Tightening】

・Conical Nut

BN Type
SBN Type
Click here for detail ☞