Hollow Wall Anchor ITA-V／ITA-VS／ITA-R／ITA-RS

Hollow Wall Anchor　ITA-V／ITA-VS／ITA-R／ITA-RS

For extruded cement panels / Toggle (roll plate) fixing Type

ITA-V+D/ITA-VS+D are recommended by ECPA (Extruded Cement Plate Association).
The roll plate part has a double structure to exhibit a strong holding power.
The roll plate part is shortened for extrusion cement board., so it can be easily installed.
Provided with 1 designated drill bit per box.

［Application］

Installation for Handrail/ Bracket/ Hollow Walls such as Bulletin Boards, etc.

Installation Procedure

❶Drill a hole

❷Insert anchor in the hole

❸When the roll plate part comes out in the hollow, it rotates naturally

❹Installation complete

・Suggested installation torque

Installation torque　N・m
M8	8
M10	15

Mechanical Properties

ITA-V(S)+D Type

強度表をPDFで開く

Thread	Max. load tensile strength	Allowable tensile load
		Unit：kN
M8	4.22	0.8
M10	4.26	0.8

・This is an experimental value using an extrusion cement board with a thickness of 60 mm, and is not a guaranteed value. (Base metal destruction)
・Use a designated drill bit (Amera Drill AMD type)
※This is the allowable tensile load recommended by the Extruded Cement Board Association.

ITA-R(S)+D Type

強度表をPDFで開く

Thread	Max. load tensile strength	Allowable tensile load
		Unit：kN
–	–	0.8
M10	4.0	0.8

・Catalog value for extrusion cement board 50mm thick. (Base metal destruction)
・Use a designated drill bit (Amera Drill AMD type)

Size Chart

ITA-V+D TYPE: STEEL / TRIVALENT CHROMATE COATING

サイズ表をPDFで開く

Open chart in PDF

										Unit：mm			Unit：小箱
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Qty・per
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Box (Hollow Wall Anchor qty.)	Carton
M8	ITA- 870V+D	72	62	50	15~45	8.5	30	12	30	12.0	AMD-12.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
M10	ITA-1050V+D	52	40	23	17~23	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
M10	ITA-1070V+D	72	60	43	17~43	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
M10	ITA-1010V+D	102	90	73	17~73	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (30pc. Hollow Wall Anchor)	6
W3/8	ITA-3050V+D	52	40	23	17~23	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
W3/8	ITA-3070V+D	72	60	43	17~43	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
W3/8	ITA-3010V+D	102	90	73	17~73	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (30pc. Hollow Wall Anchor)	6

・Cannot be used on plates thinner than the grip length.　・Conical nut

ITA-VS+D TYPE　STAINLESS STEEL / BODY: SUSXM7 / PLATE: SUS304

サイズ表をPDFで開く

Open chart in PDF

										Unit：mm			Unit：小箱
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Qty・per
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Box (Hollow Wall Anchor qty.)	Carton
M8	ITA- 870VS+D	72	62	50	15~45	8.5	30	12	30	12.0	AMD-12.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
M10	ITA-1050VS+D	52	40	23	17~23	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
M10	ITA-1070VS+D	72	60	43	17~43	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
M10	ITA-1010VS+D	102	90	73	17~73	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (30pc. Hollow Wall Anchor)	6
W3/8	ITA-3050VS+D	52	40	23	17~23	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
W3/8	ITA-3070VS+D	72	60	43	17~43	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6
W3/8	ITA-3010VS+D	102	90	73	17~73	10.4	30	14	30	15.0	AMD-15.0X120	1 designated drill bit (30pc. Hollow Wall Anchor)	6

・Cannot be used on plates thinner than the grip length.　・Conical nut

ITA-R+D TYPE: STEEL / TRIVALENT CHROMATE COATING

サイズ表をPDFで開く

Open chart in PDF

										Unit：mm			Unit：小箱
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Qty・per
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Box (Hollow Wall Anchor qty.)	Carton
M10	ITA-1050R+D	50	41	30	11~26	10.4	24	14	24	13.5	AMD-13.5X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6

・Cannot be used on plates thinner than the grip length.　・Conical nut

ITA-RS+D TYPE　STAINLESS STEEL / BODY: SUSXM7・SUS304 / PLATE: SUS304

サイズ表をPDFで開く

Open chart in PDF

										Unit：mm			Unit：小箱
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Qty・per
Thread	Item no.	L	Under-neck length	ℓ	Grip length	Conical nut height	C	S	Hollow width required for installation	Drilling diameter	Designated drill bit (1 pc. provided per box)	Box (Hollow Wall Anchor qty.)	Carton
M10	ITA-1050RS+D	50	41	30	11~26	10.4	24	14	24	13.5	AMD-13.5X120	1 designated drill bit (50pc. Hollow Wall Anchor)	6

・Cannot be used on plates thinner than the grip length.　・Conical nut

※The item number in the technical data is only for the Hollow Wall Anchor itself. (+D is not included)

Product Details