Triple Grip Anchor TG - Post-Installed Anchor Sanko Techno Product Information

Triple Grip Anchor　TG

For hollow wall, gypsum board / Wing expansion fixing type

Compatible with all types of gypsum board (9.5・12.5・15.0ｍｍ).

［Application］

Installation for Curtain Rod / Interior Decoration / Intercom / Electrical Work, etc.

Installation Procedure

❶Drill a hole

❷Insert

※If it is difficult to insert, tap it lightly with a hammer.

❸Tighten with the designated screw from the top of the fixture

❹After inserting the screw, rotate 5 more times to complete the installation

Mechanical Properties

TG Type

強度表をPDFで開く

Item no.	Max. load	Test base material
	Unit：kN
Item no.	Tensile strength	Test base material
TG-#8	0.15	Gypsum board 9.5mm
	0.22	Gypsum board 12.5mm
	0.31	Gypsum board 15.0mm

Size Chart

TG Type: PLASTIC

サイズ表をPDFで開く

Open chart in PDF

				Unit：mm	Unit：pc		Unit：pack
Item no.	Screw diameter	L	dk	Drilling diameter	Qty・per
Item no.	Screw diameter	L	dk	Drilling diameter	Blister pack	Carton	Carton
TG-#8-P30	3.5～4.5	30.0	9.0	6.0	30	6	60
TG-#8-P100※	3.5～4.5	30.0	9.0	6.0	100	－	15

・TG- # 8-P30 is a display set product. Orders are accepted in units of 6 packs.
・The recommended wall thickness should be at least 8.5 mm. ・Use 30 mm + fixture thickness as a guide for the screw length.
※ With one piece of MD-6.0P

Product Details