Cross Tight Fastener Bolt XT - Post-Installed Anchor Sanko Techno Product Information

Cross Tight Fastener Bolt　XT

One-side Fastener Bolt that allows user to visually check the installation status.
Can be installed from one side.
Can be installed with a commercially available impact driver.
Uses a crescent spring washer that prevents excessive tightening and allows user to visually confirm that the product has been tightened without forgetting it.
Can also be used for joining curved materials.
Can achieve orthogonal installation.

［Application］

Installation Procedure

❶ Inserting

❷ Pre-tightening

❸ Tightening

■Recommended conditions when using an impact driver

Voltage	18V
Max. torque^※	180N・m
RPM	0〜3,600min^-1
BPM	0〜4,000min^-1
Hex. bolt width across flat	6.35mm

※This is the max. torque value of a typical impact driver

●Drill the pilot hole with the specified diameter.
●Be careful not to hit the expansion part.
●Do not overtighten.
●Once tightened, the sleeve cannot be removed.

Mechanical Properties

強度表をPDFで開く

Item no.	Max. load
	Unit：kN
Item no.	Tensile strength	Shear strength
XT-1209	24.3	24.2
XT-1214	24.3	24.2

・This is the load when Cross Tight Fastener Bolt breaks
・Since it varies depending on the plate thickness, please check the test report separately

Size Chart

XT TYPE: STEEL / TRIVALENT CHROMATE COATING

サイズ表をPDFで開く

Open chart in PDF

											Unit：mm	Unit：N・ｍ	Unit：pc
Sleeve diameter	Item no.	Head height	Under-neck length	Sleeve length	Width across flat		Drill diameter	Recommended board thickness	Estimated fixing thickness	Required distance on the inner side	Max. expansion range	Tightening torque	Qty・per
Sleeve diameter	Item no.	Head height	Under-neck length	Sleeve length	Hex. bolt	Sleeve	Drill diameter	Recommended board thickness	Estimated fixing thickness	Required distance on the inner side	Max. expansion range	Tightening torque	Carton
12	XT-1209	14	49	46	13	19	13.5	1.6～6.0	3.5～9.5	45	42	15	100
12	XT-1214	14	54	51	13	19	13.5	1.6～12.0	8.5～14.5	45	42	15	100

・Pilot hole diameter: 13.0 to 14.5mm

XT TYPE: STAINLESS STEEL

サイズ表をPDFで開く

Open chart in PDF

											Unit：mm	Unit：N・ｍ	Unit：pc
Sleeve diameter	Item no.	Head height	Under-neck length	Sleeve length	Width across flat		Drill diameter	Recommended board thickness	Estimated fixing thickness	Required distance on the inner side	Max. expansion range	Tightening torque	Qty・per
Sleeve diameter	Item no.	Head height	Under-neck length	Sleeve length	Hex. bolt	Sleeve	Drill diameter	Recommended board thickness	Estimated fixing thickness	Required distance on the inner side	Max. expansion range	Tightening torque	Carton
12	XT-1209S	14.5	49	46	13	19	13.5	1.6~6.0	3.5~9.5	45	42	25	100
12	XT-1214S	14.5	54	51	13	19	13.5	1.6~12.0	8.5~14.5	45	42	25	100

・Pilot hole diameter: 13.0 to 14.5mm

Recommended Tools

For Fastener Bolt UT-S, UTB-S, XT Type
Roof High Bit

Click here for detail ☞

Cross Tight Fastener Bolt Socket
Box bit and spanner integrated tool

Item no.

XT-S12

Cross Tight Fastener Bolt Socket Bit

Item no.

XT-SB12

・The Cross Tight Fastener Bolt Socket Bit XT-SB12 is replaceable.
・Can easily understand the tightening condition of anchor by the rotation speed of the white installation speed confirmation line.

Product Details