Fastener Products

Product Details

Drill Screw　ALP-S／ALF-S

Pan Head/ Countersunk Small Head
  • Drilling screw for installing aluminum sash.
  • There is little wobbling during installation, and the penetration and installation work can be completed in one go.
  • Developed exclusively for installing aluminum sashes.
  • Corrosion protection coating is used for made of stainless steel products.
［Application］
Installation for Aluminum Sashes

・Press the drill point vertically on the place to be installed, then use a power tool to press and slowly rotate the screw.

●Please select the suitable product after confirming the thickness of the fixture.
●Please follow the size shown in the catalog to choose a recommended screwdriver bit.
●Please install at the rotation speed according to the size.
●Install the screw vertically to the fixture.
●Stop the rotation immediately after tightening is completed. Excessive torque can cause problems such as instability in the product fit and head skipping.

・Blister pack
ALF-SP Type

ALP-S TYPE: STAINLESS STEEL　SUS410　CORROSION PROTECTION COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
d Item no. L (b) Recommended
board thickness		 Lg1 Lg2 Ln Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
4 ALP-4x10S 10 5 1.0〜1.6 − 3.0 4.5 8.2 2.9 2 TB-2 1,000 10,000
4 ALP-4x13S 13 8 1.0〜1.6 − 6.0 4.5 8.2 2.9 2 TB-2 1,000 10,000
4 ALP-4x16S 16 11 1.0〜1.6 − 9.0 4.5 8.2 2.9 2 TB-2 1,000 10,000
4 ALP-4x19S 19 14 1.0〜1.6 − 12.0 4.5 8.2 2.9 2 TB-2 1,000 10,000
4 ALP-4x25S 25 20 1.0〜1.6 − 18.0 4.5 8.2 2.9 2 TB-2 500 5,000
4 ALP-4x30S 30 25 1.0〜1.6 − 23.0 4.5 8.2 2.9 2 TB-2 500 5,000
ALF-S TYPE: STAINLESS STEEL　SUS410　CORROSION PROTECTION COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc
d Item no. L (b) Recommended
board thickness		 Lg1 Lg2 Ln Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
4 ALF-4x10S 10 5 1.0〜1.6 − 4.0 3.5 6.0 1.45 2 TB-2 1,000 10,000
4 ALF-4x13S 13 7 1.0〜1.6 − 6.0 4.5 6.0 1.45 2 TB-2 1,000 10,000
4 ALF-4x16S 16 10 1.0〜1.6 − 9.0 4.5 6.0 1.45 2 TB-2 1,000 10,000
4 ALF-4x19S 19 13 1.0〜1.6 − 12.0 4.5 6.0 1.45 2 TB-2 1,000 10,000
4 ALF-4x25S 25 19 1.0〜1.6 − 18.0 4.5 6.0 1.45 2 TB-2 1,000 10,000
4 ALF-4x30S 30 24 1.0〜1.6 − 23.0 4.5 6.0 1.45 2 TB-2 500 5,000
D6FLAT TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

表をPDFで開く

Unit：mm Unit：pc
d Item no. L (b) Recommended
board thickness		 Lg1 Lg2 Ln Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
4 D6FLAT-4X13 13 7 1.0〜2.3 − 4.0 4.5 6.0 1.4 2 TB-2 1,000 10,000
4 D6FLAT-4X16 16 10 1.0〜2.3 − 7.0 4.5 6.0 1.4 2 TB-2 1,000 10,000
4 D6FLAT-4X19 19 13 1.0〜2.3 − 10.0 4.5 6.0 1.4 2 TB-2 1,000 10,000
4 D6FLAT-4X25 25 19 1.0〜2.3 − 16.0 4.5 6.0 1.4 2 TB-2 1,000 10,000
D6FLAT-S-PC TYPE: STAINLESS STEEL SUS410 / PASSIVATION TREATMENT
サイズ表をPDFで開く

表をPDFで開く

Unit：mm Unit：pc
d Item no. L (b) Recommended
board thickness		 Lg1 Lg2 Ln Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
4 D6FLAT-4X13S-PC 13 7 1.0〜2.3 − 4.0 4.5 6.0 1.4 2 TB-2 1,000 10,000
4 D6FLAT-4X16S-PC 16 10 1.0〜2.3 − 7.0 4.5 6.0 1.4 2 TB-2 1,000 10,000
4 D6FLAT-4X19S-PC 19 13 1.0〜2.3 − 10.0 4.5 6.0 1.4 2 TB-2 1,000 10,000
4 D6FLAT-4X25S-PC 25 19 1.0〜2.3 − 16.0 4.5 6.0 1.4 2 TB-2 1,000 10,000