・Press the drill point vertically on the place to be installed, then use a power tool to press and slowly rotate the screw.
●Please select the suitable product after confirming the thickness of the fixture.
●Please follow the size shown in the catalog to choose a recommended screwdriver.
●Please install at the rotation speed according to the size.
●Install the screw vertically to the fixture.
●Stop the rotation immediately after tightening is completed. Excessive torque can cause problems such as instability in the product fit and head skipping.
サイズ表をPDFで開くOpen chart in PDF
| Unit：mm | Unit：pc | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | Item no. | L | (b) | Recommended board thickness |
Lg1 | Lg2 | Ln | Head | Recommended screwdriver bit |
Qty・per | |||
| dk | k | S | Box | Carton | |||||||||
| 4.8 | LH-5×65 ◆ | 65 | 48 | 1.6〜4.5 | 12.5 | 55 | 6.5 | 12.0 | 4.6 | 7.0 | KTB-7 | 100 | 1,000 |
Steel Anchors 
Chemical Anchors 
Other Anchors 
Wall Anchors 
Roof Anchors 
Core Drill Bits 
Drill Bits 
Setting Tools 
Techno Testers 
Infrastructure Anchors 
