Fastener Products

Product Details

T-Wood Screw　TW／TW-S

Flat Head
  • With a thin head of only 0.9 mm, it is inconspicuous and has a beautiful finish.
  • Uses double-threaded screws that firmly bite into hard wood bases (single-threaded screws with a diameter of 4.2 mm).
［Application］
Installation of Hanger / Accessory

・Press the drill point vertically on the place to be installed, then use a power tool to press and slowly rotate the screw.

●Please select the suitable product after confirming the thickness of the fixture.
●Please follow the size shown in the catalog to choose a recommended screwdriver.
●The appropriate rotation speed of the power tool varies depending on the nominal diameter. Please install at the rotation speed according to the size.
●Install the screw vertically to the fixture.
●Stop the rotation immediately after tightening is completed. Excessive torque can cause problems such as instability in the product fit and head skipping.

TW TYPE: STEEL / TRIVALENT CHROMATE COATING
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc Unit：box
d Item no. L Head Recommended
screwdriver bit		 Qty・per
dk k Phillips recess no. Box Carton
4.2 TW-4.2×13-1000 13 8.8 0.9 2 TB-2 1,000 6
5 TW-5×18-750 18 10.2 0.9 2 TB-2 750 6
5 TW-5×25-600 25 10.2 0.9 2 TB-2 600 6
5 TW-5×32-480 32 10.2 0.9 2 TB-2 480 6
5 TW-5×41-350 41 10.2 0.9 2 TB-2 350 6
5 TW-5×51-260 51 10.2 0.9 2 TB-2 260 6
5 TW-5×65-180 65 10.2 0.9 2 TB-2 180 6
TW-S TYPE: STAINLESS STEEL　SUS410　PASSIVATION TREATMENT
サイズ表をPDFで開く

Open chart in PDF

Unit：mm Unit：pc Unit：pack
d Item no. L Head Recommended
screw driverbit		 Qty・per
dk k Phillips recess no. Blister pack Carton
4.2 TW-4.2x13S 13 8.8 0.9 2 TB-2 350 15
5 TW-5x18S 18 10.2 0.9 2 TB-2 250 15
5 TW-5x25S 25 10.2 0.9 2 TB-2 200 15
5 TW-5x32S 32 10.2 0.9 2 TB-2 150 15
5 TW-5x41S 41 10.2 0.9 2 TB-2 100 15
5 TW-5x51S 51 10.2 0.9 2 TB-2 80 15
5 TW-5x65S 65 10.2 0.9 2 TB-2 60 15