Techno Tester AT-10DⅡ

Light-weight and has a compact design applicable to various on-site tests.
Easy operation enables tensile testing up to 100kN.
Measurement and data storage for load and displacement can be shown simultaneous on a digital display.
Pursuing usability by reducing the size and weight, greatly improving the work efficiency of tensile tests.
Power cord free.

Model no.		AT-10DⅡ
Max. load		100kN
Max. displacement		15mm
Target anchor bolts		M6 ~M24, W1/4 ~W1 (Projection length of bolt: equal or greater than the bolt diameter and less than 120mm) Deformed Bar D10~D16 (Designated chuck sold separately)
Slope correction range		±5°
Load/ displacement accuracy		Non-linearity: ±2%F.S. ±1 digit
Mass		6.1kg
Measuring section	Measuring range	Load: 0~100kN/Displacement: 0~15mm
	Min. display value	Load: 0.1kN/Displacement: 0.05mm
	Protective structure	Splash-proof type (Corresponding to IP54)
	Indicator	Dot matrix character 128×64 dot with backlight
	Data storage	Graphical data: 99 files (load-displacement curve data), Point data: 9,999 files (test date, max. load, max. displacement at max. load)
	Output	RS-232C
	Power	Size AA battery ×4
	Continuous duty time	Approx. 30 hours when using alkaline battery and without using backlight function
	Misc.	Hold max. value, buzzer alarm, auto shutdown

Mechanical Section	Load method	Internal fastening type with linear slide mechanism
	Load sensor	Strain gauge load cell
	Load sensor Rated value	100kN
	Displacement sensor	Potentiometer
	Rated value	15mm
	Center shaft	M20 coarse threaded bolt: full length 260mm
Required min. working width		118mm
Accessories		Fastening tools kit Center shaft Adjusting nut Couplings with designated bolt (16 sizes: M6~M24, W1/4~W1) Storage case: 420×255×325mm Techno tester report・Techno tester graph (CD) PC cable USB-to-serial adapter cable

❶Set the expected value

❷Mount the coupling that suits the diameter of the anchor onto the center shaft, and screw it into the anchor.

❸Adjust the supporting legs to stabilize the tester.

❹Conduct testing by using a box-end wrench to tighten the nut.

❺Testing complete

Item name	Item no.	Specification

Coupling kit (metric)	JM20-MSET	Coupling M6~M24 Threaded bolt M6~M24 1 piece of each size
Coupling kit (inch)	JM20-WSET	Coupling W1/4~W1 Threaded bolt W1/4~W1 1 piece of each size
Coupling	JM20-M○○	JM20-M6・M8・M10・M12・M16・M20・M22・M24
Coupling	JM20-W○○	JM20-W20・W25・W30・W40・W50・W60・W70・W80
※Multi-coupling	JM20-M○○N	JM20-M8N・M10Ｎ・M12Ｎ・M16Ｎ・M20Ｎ・M22Ｎ・M24Ｎ

※Compatible with electrogalvanized, stainless steel, hot-dip galvanized bolts, etc.

Item name	Item no.	Specification

Adjusting Nut	AT-10SN	―
Open-end wrench	SS0036	Used with deformed bar chuck A type
AT-10 Height adjustable leg	AT10HL-LEG	Set of short legs 3 pieces (including leg pad and locknut) Long-leg adapter 3 pieces Hex wrench 1 piece
Center shaft	AT-10CS	M20 coarse thread bolt (full length 260 mm)