Fastener Products

Techno Tester AT-200／AT-30DII

  • Measurement and data storage for load and displacement can be shown simultaneous on a digital display.
  • Center hole with large caliber.
    (AT-200: 34.5mm diameter allows deformed bar D25 to pass through)
    (AT-30DII : 36.0mm diameter allows deformed bar D32 to pass through).
  • Hydraulic hose (3m) with one-touch coupler helps it connect easily.
  • The weight of the main unit is reduced to 11kg by adopting the aluminum cylinder (AT-200).

Model no. AT-200 AT-30DⅡ
Max. load 200kN 300kN
Max. displacement 15mm
Target anchor bolts M16〜M24、W5/8〜W1
Deformed bar D10〜D25（Designated chuck sold separately）		 M16〜M24、W5/8〜W1
Deformed bar D16〜D32（Designated chuck sold separately）
Slope correction range ±5°
Load/ displacement accuracy Non-linearity: ±1.5%F.S. ±1 digit
Mass Main unit 11.0kg 20.0kg
Measuring section 1.0kg 1.0kg
Hydraulic pump 3.9kg 3.9kg
Measuring section Measuring range & Min. display value Load：0〜200kN ／ Displacement：0〜15mm
Load：0.1kN ／ Displacement：0.01mm		 Load：0〜300kN ／ Displacement：0〜15mm
Load：0.1kN ／ Displacement：0.05mm
Protective structure Splash-Proof Type (Corresponding to IP54)
Indicator Dot matrix character　128×64dot     with backlight
Data storage Graphical data: 99 files (load-displacement curve data)
Point data: 9,999 files (test date, max. load, max. displacement at max. load)
Output RS-232C
Power Size AA battery ×4
Continuous duty time ca. 30 hours when using alkaline battery and without using backlight function
Misc. Hold max. value, buzzer alarm, auto shutdown
Mechanical Section Load method Hydraulic (hydraulic cylinder + manual hydraulic pump)
Cylinder stroke 20mm
Oil ISO VG32
Load sensor Strain gauge load cell
Load sensor Rated value 200kN 300kN
Center shaft M33 coarse threaded bolt
(Front end: M24 coarse thread): full length 290mm		 M36×P3 (Front end: M24×P2 external thread):  full length 290mm
Displacement sensor Displacement sensor Potentiometer
Displacement sensor rate 15mm
Required min. working width 123mm 135mm
Accessories Hydraulic pump (with measuring section stay mount), hydraulic hose (3m), connecting hose (3m), displacement gauge and dummy plug, displacement gauge stay mount, couplings with screw bolt (8 sizes): M16~M24, W5/8~W1, center shaft, adjusting nut, plate, washer, motor wrench, hydraulic oil (0.5L for refill), Techno tester report・Techno tester graph (CD) , PC cable, USB-to-serial adapter cable

［In the case of measuring displacement of the deformed bar］

❶Connect the main unit and the hydraulic pump using the hydraulic hose and connecting cable.
❷Select the testing mode.
❸Set the displacement gauge holder.
❹Set the main body of AT-200 and deformed bar chuck (optional accessories).
❺Adjust the three supporting legs to stabilize the testing machine on the ground.
❻Set the displacement gauge
❼Conduct testing by pressing the lever of the hydraulic pump.

AT-200
Item name Item no. Specification
Coupling kit (metric) JM24-MSET Coupling M16~M24
Threaded bolt M16~M24
1 piece of each size
Coupling kit (inch) JM24-WSET Coupling W5/8~W1
Threaded bolt W5/8~W1
1 piece of each size
Coupling JM24-M○○
JM24-W○○		 JM24-M16・M20・M22・M24
JM24-W50・W60・W70・W80
Center shaft AT-200CS M33 coarse threaded bolt (tip: M24 coarse thread) full length 290mm
Center shaft (short) AT-200-CS150 M33 coarse threaded bolt (tip: M24 coarse thread) full length 150mm
Center shaft (long) AT-200-CS450 M33 coarse threaded bolt (tip: M24 coarse thread) full length 450mm
Adjusting nut AT200-SN ―
Long leg AT-200H-LEG Long leg adapter
AT-30DⅡ
Item name Item no. Specification
Coupling kit (metric) JM24H-MSET Coupling M16~M24
Threaded bolt M16~M24
1 piece of each size
Coupling kit (inch) JM24H-WSET Coupling W5/8~W1
Threaded bolt W5/8~W1
1 piece of each size
Coupling JM24H-M○○
JM24H-W○○		 JM24H-M16・M20・M22・M24
JM24H-W50・W60・W70・W80
Center shaft AT30-CS M36 x P3 fine thread bolt (tip: M24 x P2 fine thread) overall length 290 mm
AT30-CS465 M36 x P3 fine thread bolt (tip: M36 x P3 fine thread) overall length 465 mm
Adjusting nut AT30-SN ―
Washer plate AT30-TP Corresponding to center shaft (M36)
AT30-TPL Penetrate through center hole
Corresponding to M20~M27/W3/4~W1
Long leg AT30H-LEG Long leg adapter
For all   AT-200/AT-30DII/AT-30
Interconnect cable CABLE-AT Length 3m