Anchor Installation Machine SD - Post-Installed Anchor Sanko Techno Product Information

Anchor Installation Machine　SD

Electric hydraulic installation machine for All Anchor (Hammer Drive Anchor)

Achieves safe, reliable, and comfortable All Anchor installation.
Suitable for installation in narrow spaces and ceilings.
It does not cause damage due to hammering, and can prevent damage to the mounting part and the screw part of the All Anchor pin.
The 360-degree rotating head is ideal for installation in corners and narrow spaces.
With spring which can firmly fix the installation machine and push nut.

［Application］

For C / SC / 316SC / C-D Type All Anchor installation

Installation Procedure

Installation Example

Specification

Type
Type	SD-365R	SD-308R-LH	SD-2036-CL
Recommended anchor	Hammer Drive Anchor C・SC・316SC・C-D M6～M20、W3/8、W1/2、M8D～M20D
Power source	Single-phase AC 100V 50/60Hz 10.5A		Li-ion battery：DC36V Battery capacity：2.5Ah
Working time	About 3 seconds^※1	About 3 seconds^※1	About 3 seconds^※1
External dimensions （L）×（W）×（H）mm	365×89×200	308×103×201	322×86×262
Net weight	4.0kgs	5.0kgs	4.6kgs（Machine + Battery）
Standard accessories per set	・Push nut PN-M16 ・Spanner ・6mm hex wrench ・Hydraulic oil ・Plastic storage case ・Side handle (Only for SD-308R-LH)		・Push nut PN-M16 ・Spanner ・6mm hex wrench ・Hydraulic oil ・Charger ・Battery ・Plastic storage case

※1 …Concrete strength Fc=21N/mm². Tested by All Anchor C-2013 in our lab

The concrete strength that can be used with this machine is up to Fc = 36N / mm². Please read the instruction manual when using with higher strength concrete.

Push Nut

Item no.	Recommended size
PN-M 6	C-M 6 (except C-645)
PN-M 6	SC-M 6・316SC-M6 (except SC-645・316SC-645)
PN-M 8	C-M 8 (except C-840・850 )
PN-M 8	SC-M 8・316SC-M8 (except SC-840・850・316SC-850 )
PN-M10	C-M10
PN-M10	SC-M10・316SC-M10
PN-M12	C-M12
PN-M12	SC-M12・316SC-M12
PN-M16 （Standard accessory）	C-M16 (except C-1619)
PN-M16 （Standard accessory）	SC-M16・316SC-M16

＊Note: Please check the recommended size before purchasing

Item no.	Recommended size
PN-M20	C-M20 (except C-2023)
PN-M20	SC-M20 (except SC-2023)
PN-W30	C-W3/8
PN-W30	SC-3060
PN-W40	C-W1/2
PN-W40	SC-4070
PN-M8D	C-M 8D (except C-850D)
PN-M10D	C-M10D
PN-M12D	C-M12D
PN-M16D	C-M16D
PN-M20D	C-M20D

Product Details