Anchor Setting Tool

Installation Related Tools

Setting Tool for post-installed anchors
Anchor Hammer　AH Type

Setting Tool for Post-installed anchors
Anchor Hammer　AH Type

Open chart in PDF

	Unit：kg			Unit：mm
Item no.	Weight	Hammer head width	Hammer head length	Full length
AH-11G	1.1	42	95	210
AH-13G	1.3	45	97	215
AH-15G	1.5	46	105	245

Precautions when using
If the center of gravity (sweet spot) of the hammer is shifted when hitting, or if the user hit with the grip handle, the handle may break. In addition, there is a risk of injury due to the loss of the striking part

Brush for cleaning the dust in the hole (For manual use)
Dust Brush　H Type (Nylon Brush) / W Type (Steel Wire Brush)

Brush for cleaning the dust in the hole (manual)
Dust Brush　H Type (Nylon Brush) / W Type (Steel Wire Brush)

Open chart in PDF

					Unit：mm
Item no.		Recommended product	Drill diameter	ℓ	Full length
H Type (Nylon)	W Type (Steel wire)	Recommended product	Drill diameter	ℓ	Full length
H-0910	W-0910	Chemical Anchor	9〜10	80	250
H-1213	W-1213	Chemical Anchor	12〜13	80	305
H-1415	W-1415	Chemical Anchor	14〜15	90	320
H-1618	W-1618	Chemical Anchor	16〜18	130	390
H-1920	W-1920	Chemical Anchor	19〜20	130	465
H-2223	W-2223	Chemical Anchor	22〜23	150	465
H-2425	W-2425	Chemical Anchor	24〜25	150	465
H-2628	W-2628	Chemical Anchor	26〜28	150	490
H-3032	W-3032	Chemical Anchor	30〜32	200	550
H-3435	W-3435	Chemical Anchor	34〜35	200	625

・H Type (Nylon Brush) is low in stock . It will be discontinued as soon as it is out of stock

Dust Pump for cleaning the dust in the hole　P Type

Open chart in PDF

	Unit：mm
Item no.	Recommended drilling diameter
P-1	6.4〜22.0
P-3	3.4〜13.0

Torque Wrench for Wedge Anchor installation TW-TCW
Long Socket LS-SET

Open chart in PDF

	Unit：mm	Unit：N・m
Item no.	Square drive	Torque adjustment range	Recommended type	Recommended thread size
TW-TCW	9.5（3/8″）	19〜110	TCW/STCW/TCW-D TCC/VM/AW-BW SAW-BW/AW-BWD/AW-B	M10・M12・M16・W3/8・W1/2

Open chart in PDF

		Unit：mm
Item no.	Square drive	Width across flat	Recommended type	Recommended thread size
LS-SET （17・19・24）	9.5（3/8″）	17	TCW/STCW/TCW-D TCC/VM/AW-BW SAW-BW/AW-BWD/AW-B	M10
LS-SET （17・19・24）	9.5（3/8″）	19	TCW/STCW/TCW-D TCC/VM/AW-BW SAW-BW/AW-BWD/AW-B	M12・W1/2
LS-SET （17・19・24）	9.5（3/8″）	24	TCW/STCW/TCW-D TCC/VM/AW-BW SAW-BW/AW-BWD/AW-B	M16

For AX internal screw only
AX Setting Tool

For AX internal screw only
AX Setteing Tool

		Unit：mm
Item no.	Plate diameter	Hex bolt
AX-M6SB	34	M6×30 (Trivalent chromate)
AX-M8SB	34	M8×35 (Trivalent chromate)
AX-M10SB	34	M10×40 (Trivalent chromate)
AX-W30SB	34	W3/8×40 (Black dyeing)

※Install AX-M6SB manually (by ratchet spanner, etc.)

Designated Hand Holder

For Hammer Drive Anchor installation
AL-H Type

Open chart in PDF

		Unit：mm
Item no.	L	Sliding part length	d	D1	D	Recommended type	Recommended thread size
AL-608H	246	26	8.5	18	30	C/SC/C-D/CF/B	M6・M8・W5/16
AL-1012H	269	34	13.2	21.5	30	C/SC/C-D/CF/B	M10・M12・W3/8・W1/2
AL-1600H	302	42	16.5	25	30	C/SC/C-D/CF/B	M16
AL-2000H	302	42	20.5	27	30	C/SC/C-D/CF/B	M20

For Grip Anchor installation
GA-H Type

Open chart in PDF

	Unit：mm
Item no.	L	d	L1	D	Recommended type	Recommended thread size
GA-20H	140	5	10	10	GA/SGA/GA-D	M6・W1/4
GA-25H	140	6.5	10	12	GA/SGA/GA-D	M8・W5/16
GA-30H	145	8	15	14	GA/SGA/GA-D	10M・10ML・30・30L
GA-30SH	145	8	9	14	GA/SGA/GA-D	10MS・30S
GA-40H	140	10	15	17	GA/SGA/GA-D	12M・12MS・12ML・40・40S・40L
GA-50H	150	13	20	21	GA/SGA/GA-D	M16・W5/8
GA-60H	150	16	20	25	GA/SGA/GA-D	M20・W3/4
GA-70H	150	19	20	28	GA/SGA/GA-D	M22・W7/8
GA-80H	150	21	20	32	GA/SGA/GA-D	M24・W1
GA-303035H	160	8	13	14	GA/SGA	3030・3035

・GA-303035H has two stepped sections.

Designated Setting Tool with Thread for Grip Anchor installation
GA-MH Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type	Recommended thread size
GA-10MH-55	55	GA/SGA/GA-D	M10
GA-12MH-55	55	GA/SGA/GA-D	M12
GA-16MH-55	55	GA/SGA/GA-D	M16
GA-20MH-55	55	GA/SGA/GA-D	M20
GA-30WH-55	55	GA/SGA/GA-D	W3/8
GA-40WH-55	55	GA/SGA/GA-D	W1/2

Precautions for installation
When installing the Grip Anchor, be sure to screw in the screwed part to the end. If the installation is performed with insufficient screwing, the threaded part of the anchor will be damaged.

For Drop-in Anchor installation
CT-H Type

Open chart in PDF

	Unit：mm
Item no.	L	d	L1	d1	L2	D	Recommended type	Recommended size
CT-20H	145	5	15	8	20	10	CT/SCT/GT	625
CT-25H	150	6.5	19	10	20	12	CT/SCT/GT	830・2530
CT-30H	160	8	25	12	20	14	CT/SCT/GT	1040・3040
CT-40H	155	10	31	16	25	17	CT/SCT/GT	1250・4050
CT-50H	170	13	37	20	25	21	CT/SCT/GT	1660・5060
CT-840H	150	6.5	29	10	20	12	CT/SCT/GT	840
CT-4040H	155	10	26	16	25	17	CT	4040
CT-1070H	200	8	55	12	20	14	CT	1070・3070
CT-1280H	200	10	61	16	25	17	CT	1280・4080

For Drop-in Anchor installation
GT-H Type

Open chart in PDF

	Unit：mm
Item no.	L	d	L1	D	Recommended type	Recommended size
GT-3030H	145	8	19	14	GT/SGT/GT-D	3030
GT-3030H-K	140	8	19	14	GT/SGT/GT-D	3030

・When the shoulder of GT-3030H-K is driven in until it touches the anchor, the anchor will be marked with a “completion mark”.

For Anchor Bolt, Safe Metal Anchor, Sepa Anchor installation
BA-MH Type

Open chart in PDF

	Unit：mm
Item no.	L	Recommended type	Recommended thread size
BA-6MH	150	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M6
BA-8MH	150	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M8(excluding SBA-810)
BA-810MH	150	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	SBA-810
BA-10MH	160	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M10・W3/8
BA-12MH	180	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M12・W1/2・SPA-2510H
BA-16MH	200	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M16・SPA-3010H
BA-20MH	200	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M20
BA-22MH	200	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M22
BA-24MH	200	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M24

・BA-810MH will be discontinued as soon as it is out of stock.

Setting Tool with safety guard for Grip Anchor & Drop-in Anchor installation
GA-HG/CT-HG/GT-HG Type

Open chart in PDF

		Unit：mm
Item no.	Full length	Grip length	Recommended type	Recommended size
GA-30HG	258	124	GA/SGA/GA-D	10M・10ML・30・30L
GA-40HG	258	124	GA/SGA/GA-D	12M・12MS・12ML・40・40S・40L
GA-50HG	258	124	GA/SGA/GA-D	16M・16ML・50・50L
CT-30HG	258	124	CT/SCT/GT	1040・3040
CT-40HG	258	124	CT/SCT	1250・4050
CT-50HG	258	124	CT/SCT	1660・5060
GT-3030HG	258	124	GT/SGT/GT-D	3030

Setting Tool for Grip Anchor & Drop-in Anchor installation
OH Type

Setting Tool for Grip Anchor & Drop-in Anchor installation
OH Type

Open chart in PDF

	Unit：mm
Item no.	L	Recommended product
OH-1000	1,000	For Grip Anchor and CT Anchor installation/Front Head FH Type
OH-1500	1,500	For Grip Anchor and CT Anchor installation/Front Head FH Type
OH-2000	2,000	For Grip Anchor and CT Anchor installation/Front Head FH Type
OH-2500	2,500	For Grip Anchor and CT Anchor installation/Front Head FH Type

Front head for Grip Anchor OH Type & Drop-in Anchor Setting Tool
FH Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type	Recommended size
FH-30GA	103	GA/SGA/GA-D	10M・10ML・30・30L
FH-40GA	103	GA/SGA/GA-D	12M・12MS・12ML・40・40S・40L
FH-30CT	113	CT/SCT/GT	1040・3040
FH-40CT	119	CT/SCT	1250・4050
FH-30GT	107	GT/SGT/GT-D	3030
FH-303035GA	101	GA/SGA	3030・3035

Setting Tool for Slab Only Anchor installation
PDF-H Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended product
PDF-3020H	145	Slab Only Anchor

Setting Tool for Adjust Anchor installation
AG-H Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type	Recommended thread size
AG-6H	46	AG/SAG	M6
AG-8H	47	AG/SAG	M8
AG-10H	53	AG/SAG	M10

Setting Tool for AZ Anchor installation
AZ-H Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended product
AZ-30H	73	AZ Anchor
AZ-30HL	150	AZ Anchor

Setting Tool for Roll Anchor installation
SX-H Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended product
SX-6H	140	Roll Anchor

Setting Tool for Super Squeeze Pin　OH-SSP Type
Front head FH Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended product
OH-SSP	140	Super Squeeze Pin Front Head FH Type

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type	Recommended size
FH-650	138	SSP	650
FH-670	158	SSP	670
FH-610	188	SSP	610

Hollow Wall Anchor Setting Tool

Setting tool for Hollow Wall Anchor installation　BQ Type

Open chart in PDF


Item no.	Recommended product
BQ-K	B/BS/B-S
BQ-Z	B/BS/B-S
BQ-C	B/BS/B-S/B-C/B-L/B-O

※B-409C / L / O and B-412C cannot be installed by BQ-K / BQ-Z
※M8 can only be installed by BQ-Z

Anchor Removal Tool

For Grip Anchor removal　SNK-30/40

Open chart in PDF


Item no.	Set details	Recommended size
SNK-30/40	Special pick up tool (W3/8, W1/2)	GA-30S/30・GA-40S/40・SGA-30S/30/40・GA-30D/40D
SNK-30/40	Rod (W3/8, W1/2)	GA-30S/30・GA-40S/40・SGA-30S/30/40・GA-30D/40D
SNK-30/40	Pull out handle	GA-30S/30・GA-40S/40・SGA-30S/30/40・GA-30D/40D

Installation procedure

1. Screw the tool sleeve body into the internal screw of the Grip Anchor body.

2. Rotate the rod until it reaches the cone at the bottom of the anchor. The reaction force of rod’s action force presses the cone and pulls the main body and the cone apart.

3. Pull the pull-out handle while shaking it from side to side with both hands, to pull the Grip Anchor body out from base material.

4. Pick up the remaining cone in the hole with the special pick up tool.

SNK-SDS

Open chart in PDF


Item no.	Set details		Recommended size
SNK-30SDS	SDS Shank Removal Tool for W3/8	Pick up tool	GA-30S/30・GA-30D
SNK-40SDS	SDS Shank Removal Tool for W1/2	Pick up tool	GA-40S/40・GA-40D

Installation procedure

1. Set the Removal Tool by tightening it with the internal screw of the anchor body by hand.

2. Rotate the Removal Tool by power drill and pull it out at once until the anchor body slips.

3. Remove the cone remaining in the hole with the pickup tool in the set.

4. Stuck the anchor body with the base material. Set the power drill to reverse rotation mode, rotate and release the anchor body from the removal tool.

Setting Tool (For Power Tool)

Setting Tool for Hammer Drive Anchor installation　AL-H-SDS Type
（For lightweight hammer drill）

Open chart in PDF

			Unit：mm
Item no.	L	D	Sliding part length	Recommended type	Recommended thread size
AL-8H-SDS	199	21.5	35	C/SC	M8・W5/16
AL-10H-SDS	202	21.5	35	C/SC	M10・W3/8

・Cannot use this tool for C-D Type

Setting Tool for Grip Anchor installation　GA-H-SDS Type
（For lightweight hammer drill）

Open chart in PDF

	Unit：mm
Item no.	L	D1	L1	D	Recommended type	Recommended size
GA-30H-SDS	145	8	15	14	GA/SGA/GA-D	10M・10ML・30・30L
GA-40H-SDS	145	10	15	17	GA/SGA/GA-D	12M・12MS・12ML・40・40S・40L
GA-303035H-SDS	160	8	13	11.5	GA/SGA/GA-D	3030・3035

Setting Tool for Drop-in Anchor installation CT-HSDS Type
（For lightweight hammer drill）

	Unit：mm
Item no.	L	D1	L1	D2	L2	Recommended type	Recommended size
CT-20HSDS	145	5	15	8	20	CT/SCT/GT	625
CT-25HSDS	160	6.5	19	–	–	CT/SCT/GT	830・2530
CT-840HSDS	160	6.5	29	–	–	CT/SCT/GT	840
CT-30HSDS	160	8	25	–	–	CT/SCT/GT	1040・3040
CT-4040HSDS	160	10	31	–	–	CT/SCT/GT	4040
CT-40HSDS	160	10	31	–	–	CT/SCT/GT	1250・4050
CT-30SDS100	1,000	8	25	–	–	CT/SCT/GT	1040・3040
CT-30SDS150	1,500	8	25	–	–	CT/SCT/GT	1040・3040

Setting Tool for Drop-in Anchor installation GT-HSDS Type
（For lightweight hammer drill）

Setting Tool for Drop-in Anchor installation GT-HSDS type
（For lightweight hammer drill）

Open chart in PDF

	Unit：mm
Item no.	L	D1	L1	D	Recommended type	Recommended size
GT-3030HSDS	145	8	19	11.5	GT/SGT/GT-D	3030
GT-3030HSDS-K	145	8	19	14	GT/SGT/GT-D	3030
GT-3030SDS100	1,000	8	19	12	GT/SGT/GT-D	3030
GT-3030SDS150	1,500	8	19	12	GT/SGT/GT-D	3030

・When the shoulder of GT-3030HSDS-K is driven in until it touches the anchor, the anchor will be marked with a “completion mark”.

Setting Tool for Anchor Bolt, Safe Metal Anchor, Sepa Anchor installation
BA-MH-SDS Type（For lightweight hammer drill）
BA-MH-HEX Type（For hammer drill）
BA-MH-MAX Type（For hammer drill）

Open chart in PDF

	Unit：mm
Item no.	L	d	D1	L1	L2	D	Recommended type	Recommended thread size
BA-6MH-SDS	110	6.5	9.5	12	25	12.5	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M6
BA-8MH-SDS	160	8.5	12	12	70	15.5	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M8
BA-10MH-SDS	205	10.5	14	15	120	18	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M10・W3/8
BA-12MH-HEX	280	13	17.7	20	150	21.5	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M12・W1/2・SPA-2510H
BA-16MH-HEX	310	16.5	21.5	24	160	25	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M16・SPA-3010H
BA-20MH-HEX	310	20.5	25.5	30	160	29	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M20
BA-22MH-HEX※	310	22.5	–	160	–	32	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M22
BA-24MH-HEX※	310	24.5	–	160	–	34	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M24
BA-12MH-MAX	280	13	17.7	20	150	21.5	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M12・W1/2・SPA-2510H
BA-16MH-MAX	310	16.5	21.5	24	160	25	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M16・SPA-3010H
BA-20MH-MAX	310	20.5	27	30	160	29	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M20
BA-22MH-MAX※	310	22.5	–	160	–	32	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M22
BA-24MH-MAX※	310	24.5	–	160	–	34	BA/SBA/BA-D/SPA/SMS-UN/MS-UND/SGMS-UN	M24

※The marked machine holder has a straight shaped driving part.

Setting Tool for Long Metal Anchor installation　ML-MH-HEX Type
（For hammer drill）

Open chart in PDF


Item no.	Recommended type	Recommended size
ML-1217MH-HEX	ML-D	1217
ML-1623MH-HEX	ML-D	1623

Setting Tool for Wedge Anchor installation　TCW-HSDS Type
（For lightweight hammer drill）

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type
TCW-616HSDS	160	TCW/STCW/TCW-D

Specialized Setting Tool for Deformed Bar Anchor DGA Type
DGA-H-SDS Type（For lightweight hammer drill）
DGA-H-HEX Type（For hammer drill）

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type	Deformed bar
DGA-10H-SDS	120	DGA	D10
DGA-1013H-HEX	155	DGA	D10・D13
DGA-1016H-HEX	170	DGA	D10・D13・D16

Setting Tool for Slab Only Anchor installation　PDF-HSDS Type
（For lightweight hammer drill）

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type
PDF-3020HSDS	145	Slab Only Anchor

Setting Tool for Slab Only Anchor installation
Anchor DH system (For drilling + installing)
PDF-DH Type
（For lightweight hammer drill）

Setting Tool for Slab Only Anchor installation
Anchor DH system (For drilling + installing)
PDF-DH Type
（For lightweight hammer drill）

Open chart in PDF


Item no.	Description	Recommended type
PDF-3020DH	Drill with a Stopper + Installation tool	Slab Only Anchor
PDF-12.5X20DH	Drill with a Stopper for Anchor DH System	Slab Only Anchor
PDF-3020HT	Installation tool for Anchor DH System	Slab Only Anchor

Multipurpose Setting Tool for Drop-in Anchor (Drilling + Installing)
GT/CT-DH-SDS Type
（For lightweight hammer drill）

Open chart in PDF


Item no.	Recommended type	Recommended size
GT-3030DH-SDS	GT/SGT/GT-D	3030
CT-3040DH-SDS	CT/SCT/GT	3040

・With clip hook

Multipurpose Setting Tool for Wedge Anchor (Drilling + Installing)
AW-DH Type
（For lightweight hammer drill）

Open chart in PDF


Item no.	Recommended type	Recommended size
AW-3050BW-DH	AW-BW/SAW-BW/AW-BWD	3050

Installation for Metal Undercut Anchor
MUC-MH-MAX Type
（For hammer drill）

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type	Recommended size
MUC-12MH-MAX	380	SMUC/MUC-D	M12
MUC-16MH-MAX	380	SMUC/MUC-D	M16
MUC-20MH-MAX	380	SMUC/MUC-D	M20

※This is a made to order product.

Installation for Metal Undercut Anchor Smart Type
MUS-MH-SDS Type
（For lightweight hammer drill）

Open chart in PDF

	Unit：mm
Item no.	Full length	Recommended type	Recommended size
MUS-8MH-SDS	280	MUS/SMUS	M 8
MUS-10MH-SDS	280	MUS/SMUS	M10
MUS-12MH-SDS	280	MUS/SMUS	M12

Attachment

For Chemical Anchor installation
CA-SDS Type（For lightweight hammer drill）

Open chart in PDF

	Unit：mm
Item no.	Square drive	Recommended type
CA-127SDS	12.7	AP/AP-S/AP-L/HP/D
CA-190SDS	19.0	AP/AP-S/AP-L/HP/D

For Chemical Anchor installation
CA-HEX Type（For hammer drill）

Open chart in PDF

	Unit：mm
Item no.	Square drive	Recommended type
CA-127HEX	12.7	AP/AP-S/AP-L/HP/D
CA-190HEX	19.0	AP/AP-S/AP-L/HP/D

For Chemical Anchor installation
CA-MAX Type（For hammer drill)

Open chart in PDF

	Unit：mm
Item no.	Square drive	Recommended type
CA-127MAX	12.7	AP/AP-S/AP-L/HP/D
CA-190MAX	19.0	AP/AP-S/AP-L/HP/D

Socket

For Chemical Anchor installation（For deformed bars / DK Attachment）
DK Type

For Chemical Anchor installation（For deformed steel bars / DK Attachment）
DK Type

Open chart in PDF

	Unit：mm
Item no.	Square drive	Recommended attachment
DK-10	12.7	CA-127SDS/CA-127HEX/CA-127MAX
DK-13	12.7	CA-127SDS/CA-127HEX/CA-127MAX
DK-16	12.7	CA-127SDS/CA-127HEX/CA-127MAX
DK-19	19.0	CA-190SDS/CA-190HEX/CA-190MAX
DK-22	19.0	CA-190SDS/CA-190HEX/CA-190MAX
DK-25	19.0	CA-190SDS/CA-190HEX/CA-190MAX
DK-29	19.0	CA-190SDS/CA-190HEX/CA-190MAX

Product Details