Denka Quick Capsule Ｄ

For concrete / Rotation ・Hammer-in type

Cement-based and nonflammable.
Easy installation by immersing in water and pushing the rod by rotation and hammering.
Excellent alkali resistance.
Can be installed on walls and ceilings.

［Application］

Installation for Chimney Foundation Fixed / Rockfall Prevention Net / Rail Bracket, etc.

Installation Procedure

❶Drill a hole

❷Clean the hole 2 to 3 times

❸Mark the anchor rod

❹Insert and hammer in

⚫Please follow the table below for the water absorption time.
⚫Please perform the installation within 3 minutes after absorbing water.
⚫Carefully remove the dust and debris from the pilot hole.
⚫Please use in a dry place. Once it absorbs water, it cannot be used.
⚫Do not move the rod or deformed bar for about 30 minutes after driving until the cement hardens.
⚫When installing on the wall or ceiling, please be careful about liquid dripping.

❺Attach fixing elements after curing

・Water Absorption Time

Size	D-10	D-12	D-16	D-19	D-22	D-25	D-30	D-36
Second	10〜15	10〜25	25〜30	30〜40	40〜50	60〜80	80〜120	80〜120

・Please note that the strength varies depending on the water absorption time
・Adjust the soaking time according to the water absorption of the concrete to be installed

Mechanical Properties

D Type

強度表をPDFで開く

Item no.	Drilling depth	Ave. load
	Unit：mm	Unit：kN
Item no.	Drilling depth	Tensile strength
D-10	90	15〜30
D-12	100	25〜50
D-16	130	40〜80
D-19	200	80〜120
D-22	250	100〜150
D-25	300	150〜250
D-30	350	250〜350
D-36	400	400〜500

・The tensile strength is the catalog value provided by the manufacturer (Fc=18〜36N/mm2 concrete).

Size Chart

D TYPE / PAPER CAPSULE: EXPANSIVE QUICK-HARDENING MORTAR

…JCAA Certified　

…SHASE-S Standard

サイズ表をPDFで開く

Open chart in PDF

						Unit：mm		Unit：pc
D	Item no.	L	Content ㎤	Threaded rod / Deformed bar	Drilling diameter	Drilling depth	Qty・per
D	Item no.	L	Content ㎤	Threaded rod / Deformed bar	Drilling diameter	Drilling depth	Bag	Box
10.0	D-10	100	7.5	M10・W3/8	12.0	90	10	200
10.0	D-10	100	7.5	D10	13.0	90	10	200
12.5	D-12	100	11.5	M12・W1/2	14.5	100	10	200
12.5	D-12	100	11.5	D13	16.0	100	10	200
15.5	D-16	130	23.5	M16・W5/8	19.0	130	10	100
15.5	D-16	130	23.5	D16	20.0	130	10	100
19.5	D-19 ※	180	52.0	M20	24.0	200	5	50
19.5	D-19 ※	180	52.0	W3/4	22.0	200	5	50
19.5	D-19 ※	180	52.0	D19	26.0	200	5	50
23.5	D-22 ※	235	99.0	M22・W7/8	28.0	250	5	20
23.5	D-22 ※	235	99.0	D22	30.0	250	5	20
27.5	D-25 ※	250	148.0	M24・W1	32.0	300	－	20
27.5	D-25 ※	250	148.0	D25	34.0	300	－	20
34.0	D-30 ※	305	275.0	M30・W1-1/4	40.0	350	－	20
34.0	D-30 ※	305	275.0	D32	42.0	350	－	20
40.0	D-36 ※	355	445.0	M36・W1-1/2	48.0	400	－	20
40.0	D-36 ※	355	445.0	D38	50.0	400	－	20

※It will be a made-to-order product

Product Details